K40 YG10 YG11 Cemented Tungsten Carbide Drill Tips For Wood Working

K40 YG10 YG11 Cemented Tungsten Carbide Drill Mill Tips

Cemented carbide can be used for making the drill bits/ end-mills / reamers; automobile special cutters, printed circuit board special cutters, engine special cutters, horologe processing special cutters, integral vertical milling cutter, graver and etc. Besides, they can be also used for making of cemented carbide stamping head, core bar and perforation tools.

Carbide saw blade’s working surface requirements:
The surface of the saw blade shall not have defects such as delamination, cracks and bubbling, and obvious bleeding and carbon removal.

The maximum size of the edge of the serrated blade and the corner drop shall not exceed 0.15mm, and the non-blade shall not exceed 0.3mm.

Carbide saw blade surface color requirements:

After surface treatment, the carbide sawtooth has uniform color, no debris, no oil, etc.

The surface color after passivation is gray-black, silver-gray after sandblasting, and the surface is silver-white after coating treatment.

Application:

Wood: ordinary wood, hard wood, recycled wood,

Soft metal: aluminum alloy, non-ferrous metals such as copper and lead, soft metals,

Sheet metal: professional cutting of industrial plywood, MDF and sandwich panels,

Steel: Professional cutting for steel, metal, etc.

Material introduction :

Grade, performance and application of tungsten carbide rods

YG6 ,

Good Wear resistance, used for hard wood, processing original wood, aluminum section bar, brass rod and cast iron.

YG8 ,

Suitable for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.

YG11 ,

Medium grain, for wear parts and mining tools.

YG15 ,

Medium grain, for mining tools, cold heading and punching dies.

YS2T ,

Fine carbide, high wear resistance, high bending strength, high resistance to bonding, high thermal strength. Machining of refractory alloys, stainless steel and high manganese steel etc. Mainly used for disc cutter and other tools

YL10.2 ,

Wear resistance and strength comparatively higher, suitable for processing cast iron, non-ferrous metal and non-metalloid materials.

Should you have any inquiries or requirements on carbide inserts or tips , please do not hesitate to contact us.