Wood Cutting Tool Tungsten Carbide Saw Tips For Medium High Density Board

tungsten carbide saw tips usually used for process wood materials.as dry wood ,soft wood ,hard wood,original wood,solid wod,multiple wood,and nonferrous metal,most kinds of steel materials,granite,marble

products Features

1. With Submicron grain size
2. High wear resistance and toughness
3. High combination abilities
4. Precision Ground and polished
5. With HIP sintering

6. used for cutting steel, wood
7. over 100 types

Parameter:

Operating Requirement:

1, select suitable saw blades according to the design requirements of the equipment.

2, there are professional operators to install and use, and wear labor clothing, wearing protective glasses, ear muff and so on.

3, When working, the work piece should be ensured to be fixed, profile positioning in line with the direction of the cutting tool, so as to avoid abnormal cut-in, do not apply lateral pressure or curve cutting, feed should be stable, avoid blade impact contact with the work piece, resulting in saw blade damage, or work piece flying out, an accident.

4, When abnormal sound and vibration, rough cutting surface or odor are found, the operation must be terminated immediately and checked in time so as to avoid accidents.

5, When cutting and stopping cutting, do not feed too fast to avoid breakage and breakage.

6, If cutting aluminum alloy or other metals, special cooling lubricant should be used to prevent the saw blade from overheating, producing paste teeth, and other damage, affecting the cutting quality.

7, Equipment chip removal slot and slag suction device to ensure smooth, to prevent accumulation of slag into blocks, affecting production and safety.

8. When dry cutting, do not cut continuously for a long time, so as not to affect the service life and cutting effect of the saw blade; Wet blade cutting, should be cut with water to prevent leakage of electricity.