Milling cutters/end mills are broadly divided into:

1. Square end mill: finish milling or rough milling, milling grooves, removing a large number of blanks, small-area horizontal plane or contour finishing;

2. Ball end milling cutter/end mill: semi-finishing and finishing of curved surface; the small blade can finish milling small chamfer of steep surface/straight wall.

3, Radius end mill: rough milling when the surface change is small, the small concave area is less, and in relatively flat area.

4. Taper end mills: with chamfer, it can be used for rough milling to remove a large number of blanks, and it can also be fine-milled with a small chamfer on the flat surface (relative to the steep surface).

5. Dill

6. Thread mill

7. Formed cutter

Advantages:

1. With excellent cutting performance in both dry and wet cutting.

2. Using fine-grained high-quality carbide rods, imported five-axis tool grinding machines, strict tool inspection standards to ensure the size of the tool and consistency of the runout.

3. The smooth shank has excellent chamfering, which is convenient for installation, it saves the time of changing the tool.

4. Advanced coating after-treatment technology, for closer combination with substrate, lower friction and superior surface quality.

5. Double-edged belt desigh, and large space for chip removal.

Specification

HRC 45 solid carbide end mill ball type

Blade diameter range from 0.5mm to 10 mm, spiral angle 30 degree, hardness HRC 45.

Fine tungsten carbide, WC=90%,CO=10%,TRC>3800N/㎡, ideal for carbon steel, alloy steel and iron mold materials.

2-Flute Ball Carbide Ball End Mill

4-flute ball carbide end mill

Applications

1. Suitable for Copper, Cast Iron, Carbon steel, Tool steel, Mould steel, Die steel, Stainless steel, Plastic, Arcylic, etc.

2. Applicated for Aerospace, transportation, Medical equipment, military manufacturing, mould development, apparatus and instrument, etc