11 lines black collector ring for Agriculture Center pivot irrigation system

Features:

1. with 11 rings the collector ring gives total connection between the main electric panel and the spans

2. Bearing rotate,make sure good performance.

3. the collector ring is water proofed

4. Stainless steel shaft makes long lifetime.

Installation:

The collector ring is installed on the center pivot irrigation frame,consists of rotation part and fixation part.The rotatry structure of rotating prt connected device called "roter:,the fixed part installed on the bracket of the equipment,called "stator"

The "rotar" is fixed through the G1" threaded hole or the G 1/2" threaded hole on the base side.The "stator" is installed on the base through the mouting shaft G1"

Maintenance:

1. The center piovt collect ring's working temperature:-40℃~+80℃

2. Do not operated the device over the rated voltage and current.

3. Please replace the carbon brush when it is weared more than 1/4 of the original length,

4. Please grease the injection nozzle regularly to prolong the life of bearing.

Specification:

1. Dynamic contact resistance:<10mΩ

2. Voltage:0-480V/240VAC

3. Current:25Amp per ring

4. Contact material:brass & Carbon brush

5. House material:metal base & ABS cover/aluminium cover

We are professionally manufacture center pivot irrigation system spare parts in China,our products as belows:

Collector ring: 3models for valley and zimmatic irrigation system

Tower box: at least 10 models for both valley and zimmatic irrigation system

Main control panel:several models for center pivot and linear irrigation system.

Sprinkler: Sprinkler head,hose,weight,connector.

Gearmotor and Gear box:with coupler and coupler protector

Accessories: PERCENTAGE TIMER,VOLT METER,MICRO SWITCH,AC CONTACTOR,VALVE BODY,ROD LINKAGE,RUBBER,HOSE,CLAMP,AND SO ON.

Shipping and delivery time:

Detailed Images: