High Pressure Forced Draught Flue Gas Centrifugal Blower Fan

Introduction

The High Pressure Forced Draught Flue Gas Centrifugal Blower Fan is designed for applications requiring high pressure.

Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement.

The High Pressure Forced Draught Flue Gas Centrifugal Blower Fan is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes.

The fans are divided into general type, explosion-proof type, anti-corrosion type and high temperature type.

In the case of common base, the installation is very simple and requires little support from a professional technician.The bearing housing is reserved for the installation position of the temperature and vibration sensors, and the fan operation monitoring device can be conveniently installed. When the airflow resistance is increased, the motor load will be automatically reduced and the motor will not be burnt.

Technical data

FAQ

1. What parameters need to be provided when you design the industrial centrifugal fans ?

Answers: Air flow, total pressure or static pressure, inlet temperature, local voltage and frequency, Altitude etc.

If there is flammable and explosive gas, or big dust loading in the medium, please also inform the designer.

2. How about your company’s pre-sales service and after-sales service ?

Answers: Before our cooperation, we have the professional technical team to help you make the technical solution according to your working condition, to make sure the centrifugal fan efficiency operation.

After sales service, we will offer 12 months’ repairing service, and provide lifelong follow-up services. Besides, our engineers are available for going abroad to offer the repairing service.

3. Does your company have qualifications ?

Answers: SIMO Blower has obtained ISO 9001-2008, CE, BV certifications and so on.