45kw Salt Centrifuge Machine 415v ECT Voltage ISO9001 Certification

Product Application:

Automatic continuous centrifuge is a new kind of horizontal spiral centrifuge discharge, its working principle is to use solid - liquid specific gravity difference, and relying on centrifugal force field to make it thousands of times to broaden the solid phase was settling under the influence of centrifugal force, and then end solid-liquid parting, and the role of the body especially the discharge arrangements parting. Entire feed and parting process are successive, close, automatically ends. Centrifugal sedimentation method parting parting suspension components centrifugal machine.

Working Principle:

Three-phase horizontal screw centrifuge is mainly composed of driving part, drum and spiral conveyor. Compact structure, small volume, its operation, on the basis of principle of settlement, is solid particles which is heavier than the liquid, in a predetermined time to precipitate out. For both proportion difference and not mutually soluble liquid, can also use the same principle. After the material into the high speed rotating drum. The material inside the drum and the drum synchronous rotation. Due to the different proportion, the centrifugal force of different. Big protection solid particles by the centrifugal force is the largest, then the water, dirty oil minimum, so according to size by centrifugal force outside-in formed a concentric solid concentric layer and two layer. Solid launched by screw conveyor, liquid from their drainage mouth out.

Application:

1. Oil &gas drilling mud/fluid control

2. Industrial and municipal wastewater treatment

3. Fine Chemical slurry

4. Coal and minerals (float wash of extractive coal and dewatering of coal mud)

Product Display: