Self Cleaning System Disc Bowl Centrifuge High Speed Lanolin Separator Machine
Introduction:
Lanolin separators are used for extracting oil and fat from wool-washing waste water and obtaining relatively pure lanolin and meanwhile reducing
the cost of waste water treatment.
Techincal Parameters:
No. | Basic Type | Capacity (L/h) | BasketSpeed (mm) | Motor Power (KW) | Net Weight (kg) |
1 | GDPX328 | 3000 | 6500 | 5.5 | 450 |
2 | GDDR230 | 500 | 6930 | 2.2 | 245 |
3 | GDPX510 | 12000 | 5500 | 18.5 | 1400 |
4 | GDDB307 | 1500 | 6000 | 7.5 | 850 |
5 | GDDB407 | 1500 | 6000 | 7.5 | 850 |
Main parts: 1.In and out of the device 2.drum 3.matching water installation 4.drive system 5.engine base 6.motor,
7, solenoid valves 8, PLC control box.
1, Machine starts the friction to start off, about six to ten minutes. the machine runs smoothly, low noise and vibration, the installation path is very easy to operate.
2, The bearings use imported German FAG brand, transducer using Japan brand “ Fuji”, the main strengthen parts of Roller
body and Roller cover use 2Cr13,and the other parts of contacted materials such as Disc all use 0Cr18Ni9(SUS304).
3, The Stainless steel cover use SUS304
4, The base use casting steel, coating does the same way as ship bottom.
5, German burkert brand of the solenoid valves.
6, PLC Control achieve self -cleaning and automatically discharging.
Application :
It is widely used in lanolin sludge’s separation, to separate the 4% lanolin with some solid mixture to extract lanolin and recycle some water. It is
also applicable to some similar material’s separation, like palm oil.
Photos: