Steam Heating Milk Centrifugal Spray Dryer Machine 3.6M Tower Height

LPG200 Centrifigural Spray Dryer

Centrifugal Spray Dryer Working Principle
　　After been filtered and heated the air enters into the air distrbutor on the top of the dryer.The hot air enters into the drying room in the spiral form and uniformly . Passing through the high-speed centrifugal sprayer on the top of the tower,the material liquid will rotate and be sprayed into the extremely mist liquid beads.Throug the very short time of contacting
the heat air,the materials can be dried into the final products.The final products will be discharged continuously from the bottom of the drying tower and from the cyclones. The waste gas will be discharged from blower .

Centrifugal Spray Dryer ​ description:

Equipment design conditions and requirements

The products:The baby milk

Content water of beginning:65%(Solid content:35%)

Content water of final:≤4%

Inlet air temperature:180-220℃

Exhaust temperature:80-100℃

Water evaporation:About 300kg/hour

The negative pressure of the tower inside:-150Pa

Rotating speed frequency:40-50hz;

Feeder Capacity: 320-380kg/hour

Dry mesh: 60-150

The atmospheric pressure:760mmH2O

Ambient temperature: 20 ℃
Absolute humidity: 80%
Power supply: 380 v, 3 phase, 50 hz

The characteristics of dry milk from a liquid to easily moisture absorption, heat sensitive, food-grade requirements higher;And because it is food, more attention should be paid to the product color, fragrance, taste of the high demand.So they asked us to time must be shorter when dry, water should be low, into powder after rapid cooling and dehumidification.Our company technical personnel studied the special milk drying characteristics, developed the milk spray drying equipment.

Centrifugal Spray Dryer Parameter:

Centrifugal Spray Dryer ​ features;

1. The quality of the product can stability control

2,To prevent coking and moisture absorption wall sticking powder

3. No product material, plugging material

4. Dust recovery rate is high

5. No pollution, no leakage, easy disassembly, easy to clean

6. To realize automation control

Centrifugal Spray Dryer ​ Design of equipment
Early selection: LPG200 milk processing high-speed centrifugal spray drying units,
Heating system: the steam heating
Dust removal system: secondary cyclone separation combined dedusting water film dust catcher
Circulation system: send induced draft fan open cycle
Air filtration system: early, middle, and high-efficiency air filter
Feeder system: na mo step-less adjustable feed pump
Blanking system: star unloading valve
Control system: frequency converter adjusted atomizer speed, to ensure the best results display instrument display temperature, pressure, differential pressure, automatic tracking control variable parameters fuzzy technology and so on

The packing machine is our main products.It includes the sealing packing machine,vacuum packing machine,box packing machine,powder,granular and liquid packing machine.

Automatic Wrapping Machine