LC-500 Cuff Heat Shrinkable Packaging Machine

This machine is suitable for the packing of the pill boxes, bottles and food, chemicals, cosmetics, drinks off-grade box and set the sleeve type PE film heat shrinkable packaging, top speed of 30 packets per minute, good quality, can automatically finish goods stacked collection, transport in place, transport, packaging film sealed packaging film, shrink, photoelectric control, frequency control, PLC, man-machine interface, in the operation of the abnormal can automatically show the cause of the problem, and troubleshooting.This machine can be used alone, can also with box packing machine, labeling machine, packing machine to connect into line.

Parameter

Feeding Horizontal Dimension: 900±50mm

Wrapper:PE heat shrinkable film;

Max Packing Size:300x200x300mm ( LxWxH )

Electric:380V/50hz,three phase;

Air Pressure: 0.5-0.7Mpa;

Capacity:2-30 bags/min;

Actual Consumption of Work Power:12.8kw

Overall Dimension:2850 x 900 x 1470 mm (LxWxH) (not include the sending bottle length)

Weight: 400KG;

Material:1cr18ni9Ti carbon steel

Prepareing for installation

1, It is important to note to use the machine grounding (PE),grounding conductor (below 4 Ω ф 1.5 was more than copper wire). Pay attention to using the machine to the injecting grease lubrication system;

2, Machine mounted on levels of hard surface,flow around to avoid high temperature, moisture, dust. Please do not erode by corrosive gas and oil! In the environment of high temperature under the condition of 30% 90%;

3, Workshop to configure the power supply voltage 380 v / 50 hz, appropriate location within the workshop to install a 100 a of the air circuit breaker;

4, For compressed air pipe to be installed on a 1/2 "cut-off valve, air supply pressure is greater than 0.5 Mpa clean, dry compressed air;

5,Workshop area more than 5 x 5.5 m2. Open the door wide at 1.2 m, 1.6 m tall;