Ceramic Blasting Media Pellet B60 Fine-Tech

DESCRIPTION

Ceramic Beads blasting media are high-tech blastingmedia which are made by high quality zirconia powder as raw material, then fused in an electric furnace under high temperature over 2000 degrees, finally made into different micro beads through special technology.

APPLICATION

Ceramic beads can be used for blast pretreatment beforecoating or plating.

Among all surface cleaning methods, the ceramic beads sandblasting method is a thorough, universal, and extensive method, because:

1. Sandblasting is more efficient, thorough and cheaper than other pretreatment processes.

2. The sandblasting process allows you to freely choose the cleanliness and roughness of your workpiece.

FEATURES

1. High strength and wear resistance. The main component of ceramic shot is zirconia, which is characterized by small crystal size and high wear resistance.

2. Ceramic shot has high hardness, with Vickers hardness (microhardness) of 700hv and Rockwell hardness of 600hrc. The density and specific gravity are also much higher than those of glass beads.

3. No dust, high abrasion resistance and strength make it difficult for ceramic shot to be broken during sand blasting, so it is not easy to generate dust.

4. Sandblasting effect: the surface finish is high. Using ceramic shot sandblasting can achieve smooth satin surface brightness. Using ceramic shot of the same specification is 60-70% lower than that of glass bead sandblasting.

ADVANTAGES

Ceramic beads are made by high quality zirconia powder as raw material, and ceramic beads have strong mechanical resistance and high toughness due to their particularly fine microstructure, so it is very suitable for the blasting, polishing and shot peening during the process of metal parts production and maintenance.

Ceramic beads blasting media are zirconia-based blasting beads with high hardness and surface smoothness. As one recyclable sandblasting media,it is suitable for the blasting, finishing,cleaning, deburring, surface pretreatment in the process of metal parts production and maintenance.