Mass spectrometer heating elements

Kairui manufacturers OEM and replacement heaters for a variety of mass spectrometer manufacturers and models.

MASS SPEC HEATERS, MS HEATERS, MASS SPECTROMETRY HEATING, SOURCE HEATERS

MASS SPECTROMETER & GAS CHROMATOGRAPHY HEATERS AND PROBES

     Mass spectrometer heating elements, also referred to as source heaters or gas line heaters, are used in mass spectrometers to   turn the sample (typically in an aqueous or organic solution) into a vapor for analysis. The heaters are part of the sample conditioning system,   prior to the analyzer and detector areas, where the vaporized sample is then bombarded by ionized high-energy electrons and analyzed.    Heaters used in mass spectrometers are compact in design and provide a fairly high power density. They are fast responding and   operate at temperatures up to 400 deg. C. They include internal temperature sensors for accurate control and limiting.

KAIRUI Advantage

• Engineering Support for New Designs

• Rapid Prototyping

• Replacement Parts

Interface Heater - Ceramic Orifice Plates

APCI ceramic heater kit for Turbo V Source

Turbo V Heater - Ceramic heater for Direct insertion probe

Iondrive Heater

Ceramic Heater Features:

1) Rapid temperature rise, 10 seconds up to the rated 100ºC~230ºC; 30 seconds up to 500ºC~700ºC

2) High thermal efficiency, energy saving, no pollution, in line with environmental requirements.

3) Uniform heat, no open fire, safe to use

4) The heater is in the vacuum state, and the heater is resistant to acid, alkali and harmful gases.

5) Long service life and small power attenuation.

Our Engineering & Quality Assurance

  Kairui Hongxing engineers provide decades of experience in design and development, delivering a wealth of empirical data and experience.   Kairui Hongxing welcomes your custom requirement and will design and deliver a part that meets your challenging needs.  Kairui Hongxing is recognized for its commitment to quality and excellence by being certified in accordance with ISO 9001.