92% Hexagon Shape Mosaic Tiles

Introduction

HUAO's Hexagon Shape Mosaic Tiles can be made according to customers' needs and are an ideal solution for lining high wear areas such as curved shaped surfaces such as pipes, cones, etc. This provides protection for applications using standard large tiles that are impractical.

Advantages

HUAO's Hexagon Shape Mosaic Tiles can be made according to customers' needs and are an ideal solution for lining high wear areas such as curved shaped surfaces such as pipes, cones, etc. This provides protection for applications using standard large tiles that are impractical.

Hexagon Shape Mosaic Tiles has good anti-wear effect and has the advantages of high strength, good performance, good impact resistance and good stability.

Hexagon Shape Mosaic Tiles is formed by oxidizing and condensing at a high temperature of 1700 ℃ after being pressed by a press. Its hardness is second only to that of diamond, and has been tested by the organization. In the case of erosion and wear, the wear resistance of wear-resistant ceramics is that of ordinary steel. Dozens of times, even if the temperature reaches 1600 degrees Celsius, it will not deform, and there is almost no loss of wear resistance. Replacing other bulky wear-resistant materials with wear-resistant ceramics can greatly reduce the load on the equipment.

Instructions

Due to the strong wear resistance of wear-resistant ceramic sheets during use, the air volume and impact resistance are also large, so there are strict requirements for the selection of ceramic sheets and ceramic glue.

The ceramic sheet should use 92-98 alumina content. If you choose a variety with a lower alumina content, it will not be able to achieve its performance indicators. Wear-resistant ceramic glue should also choose a ceramic glue with a relatively high content, so that the ceramic sheet and the metal steel plate can be firmly pasted

Product Application

Size

Editor: Jiahui