Duro 60a 70a 80a Conveyor Polyurethane Skirting Apron Seal Belt Skirting Polyurethane Skirt
Duro 60a 70a 80a Conveyor Polyurethane Skirting Apron Seal Belt Skirting Polyurethane Skirt
Polyurethane skirting is installed on the sides of conveyor belt to keep material on conveyor belt and reduce material spillage and dust.
High wear resistance of polyurethane skirt board ensures long service life and reduce maintenance cost.
Life span of polyurethane skirting is usually 3-5 times longer than traditional rubber skirting.
The coefficient of friction between polyurethane skirt board and conveyor belt is lower than rubber skirting, which is more friendly to conveyor belt.
Specification>>>>
Length: 15m 20m 25m 30m per roll, or as request
Thickness: from 6mm to 20mm, as per request.
Width/Height: from 100mm to 1600mm, as request
Standard polyurethane skirting specification:
Thickness | Width | Length |
3/8’’(10mm) | 4’’(100mm) | 15m |
1/2’’(12mm) | 6’’(150mm) | 20m |
5/8’’(16mm) | 8’’(200mm) | 30m |
3/4’’(19mm) | 10’’(250mm) | |
1’’ (25mm) | 12’’(300mm) | |
Model No.:
DB-PU12100 (12mm thickness * 100mm width)
DB-PU16150 (16mm thickness * 150mm width)
Technical parameter:
Material | polyurethane |
Hardness | 60 shore a, 70 shore a, 80A |
Tensile strength | 40MPa |
Abrasion loss | 40mm3 |
Elongation at break | 600% |
Application:
Conveyor belt sealing & skirting system, coal mining, cement, aggregate, port, ore, chemical plant, etc.


