Rawhide Bone Pressing Machine For Dog Treats
Introduction of rawhide bone pressing machine:
SR-60T Rawhide Bone Pressing Machine could produce pet bone with rawhide as raw materials.
1.It is type of Flour Column and Three Board, the upmost output tonnage can be adjustable.
2.It can be adjusted among the range of 5t-60t according to the different products’ procedures, the purpose is to arrive the best required output.
3.Well, our DR-60T Pressing Machine has two types, manual operation and automatic operation, meanwhile, it can count and timing automatically, safe and protective.
4.In addition, our DR-60T Pressing Machine’s middle plate and lower plate open two-article T-slot respectively, the pressure system is rear-mounted and the below equips with horizontal floor mat.
5.After pressing, the mold plate can be moved outside, so that it could well protect the operator’s safety.
6.Machine with good safety design. While the workers place the materials or take out the final product, the bottom mold can be moved outward, so the workers is not under the upper mold. Only after the worker leave the machine, the machine should be allowed to start by pressing the two palm buttons.
7.Equipped with PLC and touch screen to realize easy control. Different languages can be input as requirement (standard language is Chinese and English).
Flow chart:
Rolling materials - Pressing - Drying
Technical parameter:
Model | DR-60T |
Theory Output | Max. 60t |
Working Surface Size | Left and Right 500mm |
Working Surface Size | Front and Back 400mm |
Height of Working Table to the Ground | 780mm |
Max. Stroke of Mobile Mould | 350mm |
Motor Power | 9kw |
Weight | 1800kg |
Dimension | 2500 x 1200 x 1900mm |
Machine and sample picture:
Test video:
Package and delivery:
Welcome send us inquiry if there are any questions
smart2@smartmachinery.cn
whatsapp/wechat: +86 15153189382