Dog Chews Bleached Rawhide Knotted Bone Pressing Machine

PLC Controlled Rawhide Dog Chewing Bone Pressing Machinery For Making Treats

Introduction & Features:

SR-60T Rawhide Bone Pressing Machine could produce pet bone with rawhide as raw materials.

Ø It is type of Flour Column and Three Board, the upmost output tonnage can be adjustable.

Ø It can be adjusted among the range of 5t-60t according to the different products’ procedures, the purpose is to arrive the best required output.

Ø Well, our SR-60T Pressing Machine has two types, manual operation and automatic operation, meanwhile, it can count and timing automatically, safe and protective.

Ø In addition, our SR-60T Pressing Machine’s middle plate and lower plate open two-article T-slot respectively, the pressure system is rear-mounted and the below equips with horizontal floor mat.

Ø After pressing, the mold plate can be moved outside, so that it could well protect the operator’s safety.

Ø Machine with good safety design. While the workers place the materials or take out the final product, the bottom mold can be moved outward, so the workers is not under the upper mold. Only after the worker leave the machine, the machine should be allowed to start by pressing the two palm buttons.

Ø Equipped with PLC and touch screen to realize easy control. Different languages can be input as requirement (standard language is Chinese and English).

Technical Parameters

Samples:

Mold Design:

The mold surface size is 500 x 400mm, so the bone size can be determined within this range. Kindly please let us know the bone size as picture below, so that we can make mold design and calculate the quantity of bones can be produced in one mold.

Machine and factory pictures:

Videos:

Please send us inquiry if there are any interest, best price will be provided within 24 hours!