T2 7mm Half Spiral Bulbs 20W CFL Compact Fluorescent Lamps P.F. >0.5

Quick Details

Description

1 . Voltage : Both 110 - 130V and 220 - 240V available with 50 / 60Hz ; Wide range voltage is possible .

2 .Can start under the condition of - 30 ℃ and low voltage .

3 . Turn on – off time is more than 12 000 times .

4 . For the pack , we have color box , single blister , double blister .

5 . Saving 80% electricity compared to traditional incandescent bulbs .

6 . warrenty is for 2 years .

7 . No flicker , No noise , No electromagnetic interference ( EMI ) .

8 . All products are output strictly under ISO 9001 Quality Management System and CE satisfied .

9 . Passing the EMC test .

10 . No mercury vapor , using solid mecury technology , Hg < 3mg .

11 . Living up to the IEC60968 & 60969 standard .

12 . The key components is the electrolytic capacitor and transister , we are choosing GRP or AISHI for our electrolytic capacitor and choosing HUAJING as our transister .

13 . Easy to apply , can change traditional incandescent bulbs directly , the ballast in integrated in to the lamp

14 . Using PBT plastic cover, PBT have two advantage : ① Inflaming retarding ② High temperature resistance

15 . Using nickleplated aluminum base , very good to avoid getting rusted .

Lamp parameters

Competitive advantage

1 . Strict raw materials inspection .

2 . Technical parameter adjustment :

1 ) Technicians will tune the technical parameters of each items to make sure the Wattage,P.F living up to the requirement of customer

2 ) Destructive test , light it in the oven to be under the conditions of high temperature and high voltage

3 ) Turn on off test , to make sure the life time of the lamp

4 ) Start test in low temperature and low voltage ( light in the fridge )

3 . In the mass production , our QC will take selective examination on every step , such as Plug-in , Wave soldering , PCB test , Tube glue , Assembly , Print , Ageing , Packing .

4 . we are testing every lamp before packed in the cartons .

5 . In the warehouse,our QCs will take sampling inspection before load the container , if not qualified with the AQL , we will rework .

6 . After laoding the container,we will trace the life time of ech order,we will pick 10 pcs of each item to light in the ageing room till the lamp die , so we can trace down the real life time of each order .

Application

Widely used in home & commercial Lighting , always using together with the downlight fixtures , applying in office , Hallway , Hotel , room , shop , ect .