Half Spiral 55W T5 Energy Saving Lamp 60 LM / W For Workshop 6400K High Lumen

Lamp parameters

Type Full Spiral
Tube Diameter: Φ 17mm
Length: /
Circle: 5.5T
Color Rendering Index: > 80 Ra
SDCM: < 5
Color Temparature: 2700K - 6400K
Luminous Efficency: > 65lm / w
2000h Luminous Depreciation: <15%
Responsive Time: < 0.5s
Turn on off time: > 10 000 times
Luminous Decay: Less than 15% at 2000hrs
Powder: 100% A - gradeTriphosphor
Power: 55W
Power Factor: > 0.9
Working Voltage: 110V - 127V / 185 - 265V
Transister / Capacitor: Huajing / Aishi
Size: E27 5
Materials: Nickelplated Aluminum

Type Soldering
Wideth: 72mm
Materials: PBT
PBT plastic cover with middle cover

Working Temp. : - 30 ℃ to + 40 ℃

Lifetime : > 8000H

Lumen : > 2500 LM

Quick Details

Description

1 . Guarantee is for 2 years .

2 . The average lifetime of our lamp is at least 6000h .

3 . Living up to the IEC60968 & 60969 standard .

4 . Turn on – off time is more than 12 000 times .

5 . No mercury vapor , using solid mecury technology , Hg < 3mg .

6 . Using PBT plastic cover, PBT have two advantage : ① Inflaming retarding ② High temperature resistance .

7 . Using nickleplated aluminum base , very good to avoid getting rusted .

8 . For the pack , we have color box , single blister , double blister .

9 . The key components is the electrolytic capacitor and transister , we are choosing GRP or AISHI for our electrolytic capacitor and choosing HUAJING as our transister .

10 . All products are output strictly under ISO 9001 Quality Management System and CE satisfied .

11 . Voltage : Both 110 - 130V and 220 - 240V available with 50 / 60Hz ; Wide range voltage is possible .

Competitive advantage

1 . Strict raw materials inspection .

2 . Technical parameter adjustment :

1 ) Technicians will tune the technical parameters of each items to make sure the Wattage,P.F living up to the requirement of customer

2 ) Destructive test , light it in the oven to be under the conditions of high temperature and high voltage

3 ) Turn on off test , to make sure the life time of the lamp

4 ) Start test in low temperature and low voltage ( light in the fridge )

3 . In the mass production , our QC will take selective examination on every step , such as Plug-in , Wave soldering , PCB test , Tube glue , Assembly , Print , Ageing , Packing .

4 . we are testing every lamp before packed in the cartons .

5 . In the warehouse,our QCs will take sampling inspection before load the container , if not qualified with the AQL , we will rework .

6 . After laoding the container,we will trace the life time of ech order,we will pick 10 pcs of each item to light in the ageing room till the lamp die , so we can trace down the real life time of each order .