CE Approved Cfrp Carbon Fiber 600gsm With Low Cost
CFRP carbon fiber wrap for bridge, beam, columns


CE Approved CFRP Carbon Fiber 600gsm With Low Cost

Carbon Fiber-reinforced polymer (CFRP) systems are simply defined as high­strength and light weight reinforcements created by composite carbon fiber reinforced polymer (CFRP) with a epoxy resin material. The performance characteristics of CFRP strengthening system have become increasingly popular in construction and retrofit applications, specifically in aging, damaged, deteriorating or overloaded concrete structures.

XQ-C600 is a high strength, unidirectional carbon fiber fabric. Material is field laminated using epoxy to form a carbon fiber reinforced polymer (CFRP) used to strengthen structural concrete elements. the fabric is 12K unidirectional woven with imported equipment to ensure the fabric is perfect in strength and resin penetration.

The primary benefit of CFRP systems versus traditional retrofit and repair methods is that significant flexural, lateral, axial or shear strength gains can be achieved with an easy-to-apply composite that does not add significant weight or mass to the structure of building, highway, bridge, tunnel.

Key Featuers:

• Adds strength without adding dead load
• Withstands sustained and cyclic load conditions
• Extremely resistant to wide range of environmental conditions
• Easy to conceal
• Flexural strengthening,
• Shear strengthening,
• Column confinement and ductility improvement.

Attention

1, carbon fabric cloth is conductive, please leave far away from electrical equipment and power supply, or take reliable protection
2, carbon cloth bent should be avoided in the process
3, the surface should be clean and dry;
4, temperature theoretically should be 5-40 ℃
5, Processing in rain and outdoor is prohibited
6, If relative humidity is greater than 85% or condensation on the concrete surface, Processing is not allowed;
7, Matched resin shall be stored sealed and away from fire and direct sunlight.
8, The place of the formulation and use of resins should maintain good ventilation;
9, on-site workers should take appropriate protection measures.

Company Profile

Xinchor Technology establised since 2005, professional manufacturer of structural strengthening products.

Our main product series:

-- Carbon fiber reinforcement system,

XQ-XW carbon fiber epoxy adhesive

XQ-XB concrete surface leveling epoxy adhesive

XQ-CFC carbon fiber fabric 12K unidirectional 200gsm-600gsm

-- Chemical Anchor series

Pure Epoxy Adhesive 360ml (5:1) 390ml(3:1) 585ml (3:1)

-- Steel bonding reinforcement system

XQ-JGN structural epoxy adhesive

XQ-GZ Grouting epoxy adhesive

XQ-FB edge sealing adhesive

-- Concrete repair system

XQ-GF crack grouting adhesive

XQ-FF crack sealing adhesive