MachineU > China Products > Chemicals
Bridge Beam Columns Two Part Epoxy , Low Viscosity Epoxy Increased Live Loads
Bridge Beam Columns Two Part Epoxy , Low Viscosity Epoxy Increased Live Loads
Specifications
Brand Name :
XINCHOR
Model Number :
XQ-XW21C
Certification :
CE
Place of Origin :
China
MOQ :
100 kgs
Delivery Time :
30 days
Packaging Details :
100 meters per roll in carton
Application :
Bridge Beam and Columns
Specs :
Load Capacity
Resistance to freezing and thawing :
Reduction rate of shearing strength ≤5%
Packing :
Barrel or plastic bucket
CE approved :
Yes
Shelf life :
2 years
Price :
Negotiable
Description

High Load Capacity Carbon Fiber Adhesive For Bridge Beam And Columns

Carbon Fiber Primer

Carbon Fiber Leveling Adhesive

Carbon Fiber Reinforced Polymer

High Load Capacity Carbon Fiber Adhesive For Bridge Beam And Columns

High Load Capacity Carbon Fiber Adhesive is strong penetration ability, Low viscosity, used for smearing of the underlayer of reinforced members' surface, the role is penetration bonding reinforcement to the broken concrete after chiseling off; of the surface of members was intact, smearing was not needed.

Usage

Adhesive for bonding external reinforcement to concrete, masonry, steel, wood, stone, etc.

Structural bonding of composite laminates (Sika® CarboDur® CFRP) to concrete.

Structural bonding of steel plates to concrete.

Suitable for use in vertical and overhead configurations.

As a binder for epoxy mortar repairs.

Advantages

Long pot life.

Long open time.

Tolerant of moisture before, during and after cure.

High strength, high modulus, structural paste adhesive.

Excellent adhesion to concrete, masonry, metals, wood and most structural materials.

Fully compatible and excellent adhesion to CFRP composite laminate.

Paste consistency ideal for vertical and overhead applications

High abrasion and shock resistance.

Convenient easy mix ratio A:B=2:1 by volume.

Solvent-free.

Color-coded components to ensure proper mixing control

Testing project Standard Result
Lot#1 Lot#2 Lot#3
Tensile Strength ≥38 Mpa 46.7 48.6 47.6
Tensile modulus of elasticity ≥2400 MPa 2437 2484 2473
Elongation ≥1.5% 2.79 2.80 2.63
Bending Strength

≥50Mpa

(no fragmental damage)

 91.0 88.8 84.9
Compressive Strength ≥70 Mpa 77.6 83.0 81.5
Bonding Capacity
Steel-Steel Tensile Shear Strength (23±2)℃, (50±5)%RH ≥14 Mpa 14.3 14.9 14.2
Steel-Steel bonding tensile strength ≥40 Mpa 40.7 40.1 41.1
Steel-Steel T-impact peeling strength ≤20 mm 0 0 0
Steel to C45 Concrete cohesive haul strength ≥2.5 Mpa (Concrete cohesion damage) 4.5 4.2 4.4
Thermal deformation temperature ≥65℃ 65.8 66.1 66.4
Non-volatile content ≥99% 99.5 99.5 99.5
Thixotropy Index ≥3mm 3.3 3.2 3.2
Ageing resistance to heat and humidity Reduction rate of shearing strength ≤12% 11.6 11.2 10.5
Ageing resistance to heat Reduction rate of shearing strength ≤5% 3.9 4.7 4.0
Resistance to alkaline medium No reduction of strength and only destruction of concrete. without any cracks, stripping, foaming on appearance pass pass pass
Resistance to alkaline medium No reduction of strength and only destruction of concrete. without any cracks, stripping, foaming on appearance pass pass pass
Resistance to freezing and thawing Reduction rate of shearing strength ≤5% 2.9 3.4 3.5
Resistance to long term stress No defect after steel to steel shearing, The deformation value of creep ＜0.4mm 0.2 0.1 0.2
Resistance to salt spray Reduction rate of shearing strength ≤5% 4.1 4.5 4.1

FAQ:

1. Can you do OEM service?
Yes,we can provide full solution for your OEM requirements..

2. Can I take a sample for quality check?
Yes,free sample can be take for a test.

3. What’s your delivery time?
20days for OEM service base on MOQ

4. Where have your products been sold to?
Our CFRP carbon fiber have been exported all over the world.

5. Are you a manufacturer?
Yes ,we are a professional manufacturer specializing in manufacturing CFRP sheet since 2005.

Bridge Beam Columns Two Part Epoxy , Low Viscosity Epoxy Increased Live Loads

Send your message to this supplier
Send Now

Bridge Beam Columns Two Part Epoxy , Low Viscosity Epoxy Increased Live Loads

Ask Latest Price
Product Detail
Brand Name :
XINCHOR
Model Number :
XQ-XW21C
Certification :
CE
Place of Origin :
China
MOQ :
100 kgs
Delivery Time :
30 days
Contact Supplier
Bridge Beam Columns Two Part Epoxy , Low Viscosity Epoxy Increased Live Loads

ZHEJIANG XINCHOR TECHNOLOGY CO., LTD.

Site Member
6 Years
zhejiang, hangzhou
Since 2005
Business Type :
Manufacturer, Exporter, Seller
Main Products :
CFRP Carbon Fiber, CFRP Sheets, CFRP Wrap
Total Annual :
10,000,000-30,000,000
Employee Number :
50~100
Certification Level :
Site Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Carbon Fiber Adhesive
MachineU China Products Chemicals
Contact Supplier
Submit Requirement