Xq-FF32 2-Component Structural Epoxy Bonding Agent

Concrete Crack Repairing Grout Epoxy

Crack Repair Grouting adhesive

Xq-FF32 2-Component Structural Epoxy Bonding Agent is a structural, moisture tolerant, two part bonding agent, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +10°C and +30°C.

Features and Benefits

Easy to mix and apply
Suitable for dry and damp concrete surfaces
Very good adhesion to most construction materials
High Bond Strength
Hardens without shrinkage
Different coloured components (for mixing control)
No primer needed
High initial and ultimate mechanical strength
Impermeable to liquids and water vapour
Good chemical resistance

As a structural bonding agent and adhesive for:

Concrete elements (including bonding fresh to hardened concrete)
Hard natural stone
Ceramics, fibre-cement
Mortar, Bricks, Masonry
Steel, Iron, Aluminium
Wood
Polyester / fibreglass and Epoxy resin materials
Glass

Easy to mix and apply
Suitable for dry and damp concrete surfaces
Very good adhesion to most construction materials
High Bond Strength
Hardens without shrinkage
Different coloured components (for mixing control)
No primer needed
High initial and ultimate mechanical strength
Impermeable to liquids and water vapour
Good chemical resistance

CHARACTERISTICS / ADVANTAGES

▪ Easy to mix and apply
▪ Suitable for dry and damp concrete surfaces
▪ Very good adhesion to most construction materials
▪ High bond strength
▪ Hardens without shrinkage
▪ Different coloured components (for mixing control)
▪ No primer needed
▪ High initial and ultimate mechanical strength
▪ Impermeable to liquids and water vapour
▪ Good chemical resistance

Processing Flow:

Crack marking

Surface treatment

Embedding the injector

Sealing with adhesive

Sealing inspection

Mixing crack grouting adhesive

Low pressure injection

Hardening

Inspection

Packaging and Logistics

1. Two components packed separately, the mixing ratio is 3:1

2. Shall be stored in cool (under 25℃), dry and ventilated place, no exceed 2 year.

3. This product is non dangerous goods, can be shipped as normal chemical materials.

Attention

Shall be stored in cool, dry and ventilated place, avoid sun exposure and high temperature

If touched by skin, clean with acetone and washed by water immediately

Do not mix too much at each time, use upon actual necessary