MachineU > China Products > Tools & Hardware > Fasteners > Anchors > Anchors
Mutual Adhesion Threaded Rod Epoxy Anchors Shock Resistance High Sher Rate
Mutual Adhesion Threaded Rod Epoxy Anchors Shock Resistance High Sher Rate
Mutual Adhesion Threaded Rod Epoxy Anchors Shock Resistance High Sher Rate
Mutual Adhesion Threaded Rod Epoxy Anchors Shock Resistance High Sher Rate
Specifications
Brand Name :
XINCHOR
Model Number :
FixingChor 165
Place of Origin :
China
MOQ :
100pcs
Payment Terms :
L/C, T/T
Supply Ability :
100,000pcs per month
Delivery Time :
30 days
Packaging Details :
individual in plastic cartridges, 20pcs/ctn,
Shelf life :
2 Years
Materials :
Pure Epoxy
Capacity :
650ml
Mixing Ratio :
1:1
Color :
Grey or red
Weight :
1200g
Initial Curing :
30 mins under 25 degree celsius
Tensile Strength :
55KN
Price :
Negotiable
Description

650ml Tow Components Resin Epoxy Anchor Adhesive For Thread Rods Installation

Chemical anchor adhesive, epoxy injection mortar, Chemical fixing glue,

Chemical anchoring system used for anchoring and rebar connections in concrete.

Strong, Versatile Epoxy Anchor Adhesives For Threaded Rod, Rebar

Item #: FixingChor165

Capacity: 650ml

Materials: Epoxy

Mixing Ratio: 1:1

650ml Tow Components Resin Epoxy Anchor Adhesive For Thread Rods Installation

A resin epoxy (RE) anchor adhesive is a two part chemical anchor that is designed to harden slowly

so you have longer working times for applications such as deep embedments

Applied in one single action this resin will produce a high performance, strong fixing with exceptionally

high chemical resistance.

Solvent free, made of modified epoxy resin, two part high performance anchoring adhesive.

Advantages:

High load capacities

Non-sagging, even overhead handling,

Crack and non-cracked concrete

Styrene free

Can use in damped area

High stability

Low odour

Good Smelling

Non contraction after harden

No transportation restrictions

High bond strength,

Can be applied in severe environments

With molecular structural combining the Hydrophilic group and hydrophobic group

Can be used and keep high performance in any environment of moisture, hot and still

works even if the surface of hole is smooth.

Good elongation property

No breaking under high stressing.

repristinate after stressing.

APPLICATION

-Fixing handrails,reinforcement bars, steel constructions, machines, wood constructions, especially suitable for big diameter rebar and rods.

-Suitable to resist loads in cracked or uncracked concrete base material for cases where anchor design theory and criteria applies.

-Bonding threaded rod and reinforcing bar into hardened concrete.

-Can be installed in a wide range of base material temperatures.

-Medium&Heavy duty load applications.

-Ideal for indoor usage.

-High durability.

2 Main Performance

Testing project Condition Index
Gel Performance (According to China National Standard GB50728-2011)
Split Tensile Strength (MPa) Under (23±2)℃, (50±5)%RH, tested by loading speed of 2mm/min ≥8.5
Flexural Strength (MPa)

≥50

(no fragment damage)
Compressive Strength (MPa) ≥60
Bonding Capacity (According to China National Standard GB50728-2011)
Steel-Steel Tensile Shear Strength (MPa) (23±2)℃ (50±5)%RH ≥10
Bond strength of Ribbed steel bar (or screw) with concrete under constrain drawing condition (23±2)℃ (50±5)%RH C30,Ф25,L=150mm ≥11
C60,Ф25,L=150mm ≥17
Steel to Steel T-peeling strength (mm) (23±2)℃,(50±5)%RH ≤25
Non-volatile contents (105±2)℃,(180±5)min ≥99%
Ageing resistance to heat and humidity 90d
Reduction rate of tensile strengths Under normal room temperature ≤12%
(According to China National Standard JGJ145-2013)
Tensile Strength (after high temperature welding)

Dia12 Grade II steel, C30 concrete

Hole dia.16mm, Depth: 150mm

 55.1N, 57.0N, 54.8N

3 Technical Data

Anchoring Adhesive used with thread rod

Thread Rod Dia

C30 Concrete

 M10 M12 M16 M20 M24
Drilling Dia.(mm) 12 14 18 24 28
Depth (mm) 90 110 145 180 220
Damage Pulling force KN Grade 5.8 Steel 29 42.2 78.5 122.5 254.5
Grade 8.8 Steel / A4 SS 36.8 52.9 94.1 147.0 211.7
Damage Cutting force KN Grade 5.8 Steel 17.4 25.3 47.1 73.5 105.9
Grade 8.8 Steel `27.8 40.5 75.3 117.6 169.4
Designed Pulling force KN 12.0 17.02 30.6 52.4 75.2
Designed Cutting Force KN Grade 5.8 Steel 12.2 17.6 32.9 51.5 74.1
Grade 8.8 Steel 18.6 27.0 50.2 78.4 113.0
Holes for each 54 25 8 5 3

ATTENTION

-Do not install anchors when substrate temperature is less than 0°C.

-Do not install anchors when the temperature is less than 10°C.

-If the cartridge is not finished, please clean the opening, then put the plug back and cap tightly.

-It can be used again in the future by replacing the static mixer.

-Please ensure hole is properly cleaned. Hole may be damp but must be free from water.

-Do not dilute mortar with any solvents and/or other chemicals.

-Please use Xinchor nozzles, other nozzles may cause ineffective mixing

and reduce the properties of the mortar.

-At temperatures below 10°C should be warmed or stored in temperatures

of 10-30°C for 24hours prior to use to improve product flow and cure.

-If the gelling time expires, please use a new static mixer.

-Do not cut or shorten nozzles.

-Not suitable for use in diamond cored holes without roughening.

-Please ensure spiral mixer in static nozzles.

-Do not install into uncured concrete.

Curing time:

Operation and Curing time
Temperarure ℃ -5 0 10 20 ≥30
Operation time (min) 60 45 30 25 20
Curing time (h) 72 48 24 12 6

Consumption Chart (holes per cartridge)

Anchor Rod dia. M10 M12 M16 M20 M24
Drilling Dia.(mm) 12 14 18 24 28
Depth (mm) 90 110 145 180 220
Each usage 8ml 13ml 28ml 62ml 103ml
360ml 45 27
390ml 48 30 14 6 3
585ml 73 45 20 9 5
650ml 81 50 23 10 6

Quality & Service :

our priority has always been providing our clients with great quality products and superior customer service with instant response.

Quick Lead :

Time We're dedicated to providing the quickest turnaround times and work very Hard to ensure that all of your deadlines are met.

Unbeatable Prices:

We continuously strive to find ways of reducing our production costs, and passing the savings over to you!

Brand Awareness:

The goal of any strong brand is achieve a level of awareness that instills the idea of quality and value into all of your potential customers.

Special Offers:

In order to maintain our competitive advantage, we are constantly running special offers on our prices and services. Contact our sales team to see how we can help you save a lot of money.

Our Product Lines:

- Carbon Fiber Reinforcement System: XQ-CFC 300gsm, 200gsm 600gsm fabric and adhesives XQ-XW

- Steel Bonding System: XQ-GZ Epoxy grouting adhesives, XQ-JGN Plate bonding Adhesives

- Crack Repairing System: XQ-GF Crack grouting adhesives, XQ-FF crack seal adhesives

- Chemical Anchoring 390ml(3:1), 585ml(3:1), 650ml(1:1),

Our History:

15 years from 2000,45 employees, 5000m2 plant, ISO9001 approved,

Our Quality

All passed China National Standard lab testing, and be similar to CE and other countries standards

Our main product series:

-- Steel bonding reinforcement system

XQ-GZ Grouting epoxy adhesive

XQ-FB edge sealing adhesive

XQ-JGN structural epoxy adhesive

-- Chemical Anchor series

Pure Epoxy Adhesive 585ml (3:1) 360ml (5:1) 390ml(3:1)

-- Carbon fiber reinforcement system,

XQ-XW carbon fiber epoxy adhesive

XQ-XB concrete surface leveling epoxy adhesive

XQ-CFC carbon fiber fabric 12K unidirectional 200gsm-600gsm

-- Concrete repair system

XQ-GF crack grouting adhesive

XQ-FF crack sealing adhesive

Mutual Adhesion Threaded Rod Epoxy Anchors Shock Resistance High Sher Rate

Product tags

strong adhesive hook

,

self-adhesive tie mount

,

self adhesive tie mount
Send your message to this supplier
Send Now

Mutual Adhesion Threaded Rod Epoxy Anchors Shock Resistance High Sher Rate

Ask Latest Price
Product Detail
Brand Name :
XINCHOR
Model Number :
FixingChor 165
Place of Origin :
China
MOQ :
100pcs
Payment Terms :
L/C, T/T
Supply Ability :
100,000pcs per month
Contact Supplier
Mutual Adhesion Threaded Rod Epoxy Anchors Shock Resistance High Sher Rate
Mutual Adhesion Threaded Rod Epoxy Anchors Shock Resistance High Sher Rate

ZHEJIANG XINCHOR TECHNOLOGY CO., LTD.

Site Member
6 Years
zhejiang, hangzhou
Since 2005
Business Type :
Manufacturer, Exporter, Seller
Main Products :
CFRP Carbon Fiber, CFRP Sheets, CFRP Wrap
Total Annual :
10,000,000-30,000,000
Employee Number :
50~100
Certification Level :
Site Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Epoxy Anchor Adhesive
MachineU China Products Tools & Hardware Fasteners Anchors Anchors
Contact Supplier
Submit Requirement