Chemical anchor adhesive, epoxy injection mortar, Chemical fixing glue,

Chemical anchoring system used for anchoring and rebar connections in concrete.

390ml 3:1 Dual Cartridge Injectable Adhesive Anchor

Item #: FixingChor139

Capacity: 390ml

Materials: Epoxy

Mixing Ratio: 3:1

Product Description:

Ultimate-performance injectable hybrid mortar with approvals for rebar connections and heavy-duty anchoring
Base materials: Concrete (cracked), Concrete (uncracked), Masonry (grout-filled CMU)
Base material condition: Dry, Wet

Features

No hole cleaning required with the revolutionary new HIT-Z anchor rod
Automatic hole cleaning with TE-CD and TE-YD drill bits in combination with Hilti vacuum cleaners
Fulfills the requirements of the most demanding ICC-ES and ETA C2 approvals for seismic applications
Working time optimized for anchor applications
Suitable for use in cracked and uncracked concrete with all anchor rods and rebar

Applications

Anchoring structural steel connections (e.g. steel columns, beams)
Anchoring secondary steel structures (e.g. racking, guard rails, sound barriers)
Anchoring safety barriers, balustrades, fire staircases
Seismic strengthening / retrofitting and bracing of reinforced concrete buildings
Structural splices / straight connections with post-installed rebars

Technical Parameter:

1. Basic parameters

1) Appearence

Part A (main): white cream

Part B (hardener): red cream / grey cream

2) Mixed Viscosity: 18-22Pa.s

3) Hardened density: 1.50±0.10g/cm³

4) Mixing ratio (Volume ratio): 390ml(3:1)

5) Shelf time: 24 months

2 Main Performance

3 Technical Data

Anchoring Adhesive used with thread rod

Processing Method

1 Tools

• Electric hammer
• Hole cleaning brush
• Air compressor
• Glue gun

2 Attention

• Drill as per requested hole dia. and depth
• Clean the hole completely
• Inject from the bottom of the hole and pull out the gun slowly.
• After planting the bar, let the gel harden in still.

• Processing Flow

Drilling: As per technical data

Cleaning: using air pump or compressed air and brush to clean the holes completely.

Assembling and Injection: Mount the static mixer onto the bottle, push out some incomplete mixed gel at the front part,then inject from the bottom of the hole, to fill 1/2 to 2/3 depth of the hole.

Bar planting: spin slowly the rebar or thread rods into the hole, adjust up and down for several times to make the gel average, but don’t touch it during hardening time.

Curing and Maintenance: According to the temperature of the base materials, give enough time to harden and start to load mounting until it hardened completely.

Curing time:

Consumption Chart (holes per cartridge)

Packaging:

• One cartridge with one static mixer in carton
• 12pcs/20pcs/30pcs per carton.
• Xinchor label or your own label.
• EXP Date on the top of cartridge.
• Customized Packing.

Shipping:

• Shipments can be arranged by sea, air, courier express.
• Courier express includes DHL, FedEx, TNT, UPS, EMS, SF, etc.