Our charcoal briquette extruder machine is another new processing way:

Step 1: Carbonization furnace to carbonize the raw material into charcoal.

Step 2: Charcoal crusher to crush the charcoal into charcoal powder.

Step 3: Wheel grinding mixer to grind the charcoal powder evenly and grind the air out which to increase the charcoal powder density. (If your raw material is charcoal powder, it will be better for you to add some binder to the charcoal powder and mix it evenly.)

Step 4: Charcoal briquette extruder machine to extrude the different shapes of final products.

Raw material for charcoal briquette extruder machine

The raw material can be charcoal powder of wood chipper, wood branch, rice husk, peanut shell, bagasse, cotton stem, corn stalk, bamboo shaving, wheat grass, etc.

Coal powder is also OK.

The raw material of the charcoal briquette extruder machine

The raw material can be charcoal powder , wood charcoal powder . coconut shell charcoal powder , rice husk charcoal powder.charcoal dust , coal powder . the most suitable size of the powder is less than 5mm . the mositure of the powder should be 12-14%

Charcoal extruder principle of work:

Charcoal extruder , which can make the powder of charcoal to different charcoal blocks shapes.

The working principle of charcoal extruder is: The motor transmits power to transmission through the V-belt. At the same time, the transmission output shaft transmits power to propeller through the floating coupling, and the thruster of propeller push forward charcoal through forming die to produce the ideal high-pressure charcoal-stick.

Equipment advantages
1, Add a forced feeder, and equipped with automatic cutter, simple to use, carbon more compact not loose.
2, The electric control device uses Delixi electrical components. The motor has functions such as overload protection and leakage protection, and it is very power-saving. The average power consumption is 3.5 kW / h.
3, Four - square, six - sided, six - prism, as well as a variety of diameters of carbon rod.