Technical parameters of Smokeless Sawdust Continuous Charcoal Carbonization Furnace:
Model | LXT-800 | LXT-1000 | LXT-1200 |
Power(KW) | 3+3+7.5+3 | 3+3+7.5+3 | 3+3+15+3 |
diameter*length (MM) | 800*1000 | 1000*1000 | 1200*1000 |
Capacity | 400-600kg/h | 700-1000kg/h | 1000-1300kg/h |
Primary heating unitA | 12 | 12 | 14 |
The host base | 10*1.25*1 | 10*1.45*1 | 10*1.64*1 |
Cooling discharging dimension (MM) | 1200*2900 | 1200*2900 | 1500*2900 |
The feed temperature | 350-450℃ | ||
The raw material size | ≤3cm | ||
The raw material moisture | ≤15 |
1. configuration the early stage of the new type gasifier gasification; 2. configuration of flue gas purification, heat exchange system, cooling system, heat steam into water, flue gas can be converted to gas recycling; 3. configuration frequency conversion feeding machine, automatic feeding, feeding speed is adjustable; 4. configuration rotary carbonation host, meet the production requirements; 5. configuration cooling discharging machine cooling products, output, product; 6. configuration control cabinet, temperature, speed regulation, drum PLC automatic control cabinet, the equipment for carbonized color display, production status should be clear;
First the biomass material is ignited in the gasifier.
The flue gas produced by burning after spraying, cooling, purification process, it produces the pure combustible gas (carbon monoxide, methane, ethane, etc.).
As the early stage of the carbonization of heat source, through early warming of the carbonizer, to feed the material when the heat reaches the special temperature.
The combustible gas that carbonation process of flue gas by spraying, cooling, purification process into burned secondary. According to this methods of circulation, sufficient to achieve a self-sufficient, then achieve the effect of energy saving.
The flue gas through purification, to reach the environment production and flue gas emissions free. Which is reached to the standards of waste gas emptying.
The temperature of carbonization reach a 600 ℃ to 900 ℃ in the process. According to the characteristics of material, the temperature can be adjusted according to the requirements.
Pre-sale
1. According to your needs, select right model for you.
2. According to your special requirements, design customized solution and manufacture customized products for you.
3. Welcome your visit.
Sale
1. Sign contract, pay deposit, we arrange production.
2. Product acceptance.
3. Help you formulate construction scheme.
After-sale
1. Assign engineer service for you on-site freely.
2. Install and adjust device, train how to operate.
3. After installation, leaving 1-2 technical staff to help you on-site production, until achieve customer satisfaction.