Semi Automatic PCB Screen Printing Machine With PLC Touch Screen Panel

FEATHERS

1. Adoption of Japanese high-precision motor and linear orbit can improve steadiness of squeegee printing;

2. The pressure of double-squeegee printing and the up/down motion of squeegee can be adjusted separately with printing head and throttle behind small air cylinder for fear of resonant vibrations;

3. Total Input Power & Voltage: single-phase 220V 50/60Hz, and total power: 100W;

4. The print head can be lifted up in inclination of 45° to facilitate installation and uninstallation of squeegee and cleaning of steel mesh;

5. The print head can be moved along and fastened to make easier location of steel mesh and have a better printing effect;

6. The mesh arms can be adjusted separately on the left and right, suitable for the printing range of 470 - 750mm;

7. The combined printing table is designed with relaining key and positioned PIN, applicable to operation of single-sided base plate and two-sided base plate;

8. In the plate-proofreading method, adoption of mesh arm with proofreading and adjustment of printed matter (bedplate) X, Y and Z makes proofreading easier and simpler;

9. Adoption of computerized PLC empowered with human-computer interface brings you many options including single/double printing and manual/auto modes

10. The squeegee seat can be adjusted fore and aft, and squeegee blade can be adjusted in the inclination of ±15° as required in printing;

11. Application of SMC pneumatic cylinder and magnetic proximity switch can make work table move to and fro and the precision of printing surface to ±0.01mm;

12. Operation air pressure: 4-6kgf/cm²; print station area: 300*400mm and 450*450mm (fit for XL); printing precision: ±0.05mm; and repeat precision:±0.02mm;

13. Configuration of auto numeration and alarm frequency setup facilitate output statistics;

14. The printing dead time can be adjusted so as to meet production demand;

SPECIFICATIONS