Manual electric ball water air compressor micro three-wire two-way valves
Product Overview
SEV8000 series electric ball valve is applicable to break-make control in heating system and air conditioning blower coil system, which consists of ball valve and actuator, and actuator drives valve ball to rotate 90 °. The actuator is driven by synchronous motor with limiting device contacts, which can make the valve cut off when it is fully open or closed, and the action is stable. Widely used in heat, air conditioning system, floor heating system, solar free vent system and other systems.
SEV8000 series electric ball valve has the function of manual switch valve, which is more convenient in the process of debugging or overhaul.
SEV8000 series valve body can adjust the size of the door switch according to the flow or time, so as to achieve the contradiction caused by the inconsistency of the initial temperature of each user's home due to pipeline design problems in a residential area, now the valve angle can be adjusted to reach the same temperature of each household.
Power supply voltage:AC220V 50/60HZ (AC24V)
Operating power:2W(Only when the valve opens and closes)
Switching Time:45S
Protection level:IP54
Operation mode: angular stroke90Degree switch, positive and negative rotation
Moment:4Nm
Working environment:2℃-60℃
Applicable medium: hot and cold water,60%Within the ethylene glycol aqueous solution
Medium temperature:2℃~ 95℃
Close the pressure difference:0.6MPa(SMV)0.3MPa(Three)
Lead length:50cm (CAN)
Driving dimensions:65x83x80mm
Body size:DN15/DN20/DN25/DN32(SMV)DN20/DN25(Three)
Synchronous motor, two corners set of spanner switch, maintain the valve status after power failure
Low noise, running noise less40dB
Plastic shaft, non-conductive, non-heat transfer
With manual auxiliary switch valve function
Add a seal lock to prevent the driver from being removed casually
Yueqing Kampa Electric Co.,Ltd. is Established in 1990.Has variety of goods ,such as Thermocouple,Thermostat,Temperature controller,Solar charge controller,AVS,Heater and so on. We are manufacturer and have ten years experience in Electrical industry. |
Our Exhibitions
Sample Rooms of Product
Production Line of Product
FAQ
Q: Are you manufacturer or Trade Company?
A: We are professional factory, founded in 2009.OEM is acceptable
Q: What's the order process?
A: Inquiry---provide us all clear requirements.
Quotation---official quotation form with all clear specifications.
Customization--- We offers ultimate customization and personalized solutions.
Sample ---Standard sample of our factory.
Payment terms--- T/T 30% in advanced, balanced before shipment.
Shipping--- by sea, air or courier. Detailed picture of package will be provided.
Q: What terms of payment you use?
A: T/T, PayPal, Western Union,L/C
Q: Do you have any instant chat tool?
A: Skype: kampa031
Whatsapp: 0086 13362788157
Email: sales05(at)elexpert.cn