Using a mobile UV disinfection robot as a carrier, an autonomous mobile multi-point disinfection of the surface of the environment and air can complete a complete disinfection of a thousand square meters in about 150 minutes, which is ten times more efficient and effective than conventional manual and fixed disinfection. It can Help kill coronavirus in hospitals, reduce acquired infections.
Features
Ultraviolet indoor mobile multi-point disinfection
Configure infrared body temperature monitoring, body temperature detection during the day, and disinfection at night
Industry's largest power efficiency killing, cumulative UV intensity up to 270W / CM2
Laser SLAM algorithm completes the construction and positioning of the global environment map
Fully mature cognitive and positioning navigation capabilities
Ultraviolet killing robot is suitable for shopping malls, stations, offices,
production sites, etc.
Robot conforms to [National Standard] GBT 30030-2013 Automatic Guided Vehicle (AGV)
UV disinfection conforms to [National Standard] GB 19258-2012 UV germicidal lamp
Parameters
Category | Item | Parameter |
Material of body | Material of body | Cold rolled steel + plastic |
Size | Size | 580x500x1200mm |
Weight | Weight (including battery) | 50KG |
Ambient temperature | 5 to 40 degrees | |
Ambient humidity | Relative humidity 5 to 95% (no condensation) | |
Running environment | Indoor use only, no excessive dust, no corrosive gas | |
Environmental conditions | Protection level | IP20 |
Cleanliness grade | Class100 | |
Antiskid coefficient of ground | >0.5 | |
Ground requirement | Horizontal ground for concrete pouring (without water, oil or dust) | |
Minimum flatness of ground | Ff25 (* AC1117 standard) | |
Vertical obstacle surmounting ability | 10mm | |
Ability to cross gullies | ±20mm | |
Ground conditions | Climbing ability | 5° |
Path selection | Secure scanning lidar based on environment mapping independent path selection | |
Navigation | Navigation system | Provide large-scale lidar mapping, lidar positioning, lidar path planning, lidar navigation functions, including obstacle avoidance and recovery control. |
Rendering of environmental map | Scanning with Slam (positioning and mapping ad the same time) | |
Navigation mode | Laser landmark navigation | |
Running speed | Maximum speed | 1 m / S (theoretical maximum speed) |
Maximum rotational speed | 180% | |
Mobility performance | Stopping precision | Position accuracy1 cm, angle accuracy:+ 2° |
Texture of material | Polyurethane | |
Driving wheel | Size | Diameter 150 * 35mm |
Battery | Industrial grade lithium iron phosphate battery, high stability, metal shell safety protection, earthquake resistance, accidental strong impact damage, no open fire | |
Capacity | 0.75kwh | |
Running time | 6H | |
Battery | Charging time | <2.5H |
Battery life | Cycle life < 1500 times, keep 80% capacity after 1500 times | |
Charging mode | Auto / manual | |
Power output | 12V 5A / 24V 5A | |
protection system | Power protection, temperature protection |