Product Features:

1. Disposable, single-use, breathable, light and environment-friendly;

2. High elasticity ear loop help fit different users and dual point attachment helps provide a secure seal;

3. Adjustable nose piece for extra comfort;

4. At least 95% filtration efficiency against certain non-oil particles.

Points for Attention:

1. This product is prohibited to be used with damaged package;
2. Do not use in atmospheres containing less than 19.5% oxygen, as this respirator does not supply oxygen; Not for use in oil mist atmospheres;
3. If the product becomes damaged, soiled, or breathing becomes difficult, leave the contaminated area immediately and replace the product;
4. This product is one-time use only and can not be washed;
5. This product should be stored in a clean, dry and ventilated environment with relative humidity less than 80% and without harmful gas.

Steps Help You to Identify A Melt-blown Layer:

1. APPERANCE:The melt-blown layer looks very different from the other two transparent non-woven layers, it looks more like a white paper.

2. NON-FLAMMABLE:Different from a paper, the melt-blown layer melts in case of fire but does not flame with very low flammability. Instead, paper burns when it comes to fire.

3. STATIC ELECTRICITY:There is static electricity in the melt-blown layer. If you tear the melt-blown layer into strips, you will obviously feel the electrostatic adsorption effect, and you can also adsorb the melt-blown layer on stainless steel.

PACKAGING AND DELIVERY

For Disposable Facemask , our normal packing is 50pcs/box, 40boxes/carton . The quantity per carton could be changed according to customer's requirement. normally OEM packing is 100cartons for MOQ.

For delivery, our delivery time is normally from 15-30days provided we received the down payment or LC doc.

SAMPLES

Free sample is offered, and we trust you will find our dental burs satisfactory and looking forward to receiving your order in the near future;

Warnings

Place mask over nose and mouth, and place an earloop around each ear.

Pull bottom of mask under chin and mold the nosepiece around the nose.

The mask should cover face from the nose to underneath the chin.

Discard mask after use, DO NOT reuse masks.