vehicle Type | | Concrete Mixer Truck | |
Drive type | | 8x4 | |
Dimension(L×W ×H)unloaded | | 9960×2520×3965 | |
Mix round cubage (m3) | | 10 | |
Rotary speed of the drumr/min | | 0-18 | |
Input speedm3 /min | | ≥3 | |
Output speedm3 /min | | ≥3 | |
The rate of remaining | | ≤1% | |
Hydraulic system | | Pump/ Motor/Retarder IMPORT PARTS | |
Approaching angle/Departure angle° | | 19/16 | |
Overhang(front/rear) (mm) | | 1500/2260 | |
Wheel base (mm) | | 1800+3025+1400 | |
Max speedkm/h | | 90 | |
Curb weightkg | | 13430 | |
Loading Weightkg | | 18270 | |
Engine | Model | MC07H.35-60/WP8.350E61Awater-cooledfour strokes6 cylinders in line with water coolingturbocharged and inter-cooling, directly injection | |
(Steyr technology) | Make | SINOTRUK | |
| Fuel type | Diesel | |
| Power, maxkw/rpm | 257/2200 | |
| Emission | EURO V/IV | |
Fuel tanker capacityL | | 300 | |
Transmission | Model | HW15710L10 forward&2 reverse10 | |
Brake system | Service brake | Dual circuit compressed air brake | |
| Parking brake | spring energy, compressed air operating on rear wheels | |
| (emergency brake) | | |
| Auxiliary brake | engine exhaust brake | |
Steering system | Model | ZF8098 | |
Front axle | cast steel I-shaped front axle VGD71 | | |
Rear axle | MCJ11 double reduction tandem axles with differential locks between wheels and axles, ratio: 5.29 | | |
Tire | 12.00R20 | | |
Electrics | Battery | 2X12V/165Ah | |
| Alternator | 28V-1500kw | |
| Operating voltage | 24V, negative grounded | |
| Starter | 7.5Kw/24V | |
Cab | TX-M(525MM single bunk),TX-F(749MM single bunk), all-steel forward control,55ºhydraulically tiltable to the front,2- arm windscreen wiper system with three speeds, laminated windscreen with casted-in radio aerial, hydraulically damped adjustable driver's seat and rigid adjustable co-driver's seat, with heating and ventilating system, outer sun visor, adjustable roof flap, with stereo radio/cassette recorder, safety belts and adjustable steering wheel, air horn, with 4-point support fully floating suspension and shock absorbers | |
MAIN SPECIFICATION OF 10 CBM MIXER | | | ||
The material of the Agitator is the mix steel | | BW300TP | ||
Thickness of the tank body mm | End plate cover | 8 | ||
| Front Conical parts | 5 | ||
| Rear Conical parts | 5 | ||
| Cylindrical parts | 5 | ||
| Drum Bottom | 5 | ||
over length mm | | 5250 | ||
Max. Diameter mm | | 2360 | ||
Mixing Tanker Volume m3 | | 10 | ||
Draght angle° | | 11 | ||
Rotation speed rpm | | 1-12 | ||
Feeding speed m3/min | | ≥3 | ||
Discharging speed m3/min | | ≥2 | ||
Surplus rate % | | ≤0.5 | ||
Water tank volume L | | 450 | ||
reduction gears | | TMG 51.2/PMP6.5 | ||
Hydraulic Pump | | SUNNY 90 /PMH P90 | ||
Hydraulic Motor | | SUNNY 90 /PMH P90 |