FEATURES
· Fast switching
· Low forward voltage, high current capability
· Low power loss, high efficiency
· High current surge capability
· High temperature soldering guaranteed: 250℃/10 seconds,0.373″(9.5mm) lead length At 5 lbs.(2.3kg) tension
MECHANICAL DATA
· Case: Transfer molded plastic · Epoxy: UL94V-0 rate flame retardant · Polarity: Color band denoted cathode end Lead: Plated axial lead, solderable per MIL-STD-202E method 208C · Mounting position: Any · Weight: 0.042ounce, 1.19 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
SYMBOL | IN5820 | IN5821 | IN5822 | UNIT | |
Maximum Repetitive Peak Reverse Voltage | VRRM | 20 | 30 | 40 | Volts |
Maximum RMS Voltage | VRMS | 14 | 21 | 28 | Volts |
Maximum DC Blocking Voltage | VDC | 20 | 30 | 40 | Volts |
Maximum Average Forward Rectified Current 0.375″(9.5mm) lead length at TL =95℃ | I(AV) | 3 | Amps | ||
Peak Forward Surge Current 8.3mS single half sine-wave superimposed on rated load (JEDEC method) | IFSM | 80 | Amps | ||
Maximum Instantaneous Forward Voltage | VF | 0.475 | 0.5 | 0.525 | Volts |
0.85 | 0.9 | 0.95 | |||
Maximum DC Reverse Current atrated DC Block Voltage at | IR | 0.5 | Ma | ||
Typical Junction Capacitance (NOTE 2) | CJ | 20 | Pf | ||
Typical Thermal Resistance (NOTE 3) | Rojl | 250 | ℃/W | ||
Operation and Storage Temperature Range | TJ .TSTG | 15 | ℃ |
Notes:
1. Pulse test 300μs pulse width,1% duty cycle
2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts
3. Thermal resistance from junction to ambient P.C.B .mounted with 0.375”(9.5mm)lead length with 2.5”×2.5“ (63.5×63.5mm)copper pads