MachineU > China Products > Electrical Equipment & Supplies > Connectors & Terminals > Terminals
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
Specifications
Brand Name :
HRT
Model Number :
A1252-T
Certification :
ISO9001/ ISO14001/UL/RoHS/REACH
Place of Origin :
China
MOQ :
75KPCS
Price :
Negotiated
Payment Terms :
TT, Western Union, PayPal, L/C
Supply Ability :
1000 pcs per day
Delivery Time :
5 to 8 working days after payment checked
Packaging Details :
paper tray with out carton
Mounting Side :
Standard on-Board
Pitch :
1.25mm
Wire range :
AWG#26-#30
Material :
Phosphor Bronzne
Finish :
Tin-plated or Gold-flash
Fire-protection rating :
UL 94V-0
Wire Termination Method :
Crimping
Insulation O.D :
1.00mm(Max)
Description

Specifiaction:
Category: Crimp Terminals
Series:A1252-TPE-A or A1252-GPE-A
Application:Signal
Material :Phosphor Bronze
Finish:Tin-plated or Gold-flash
Packaging Type: Reel
Termination Interface Style: Crimp or Compression
Wire Insulation Diameter:1.00mm(max)

Electrical & Mechanical information:
Current Rating: 1A AC, DC
Voltage Rating: 150V AC, DC
Contact Resistance: 30mΩ Max
Insulation Resistance:500MΩ Min
Withstanding Voltage: 500V AC/minute

Temperature range: -25℃ to 85 ℃

Ordering Information:

Part No. Wire Range Insulation O.D. Material Finish Qty/reel
A1252-TPE-A AWG26#-30# 1.00mm(Max) Phosphor Bronze Tin-plated 15Kpcs/reel
A1252-GPE-A Gold-flash
Note: E-stamping before tin-plated or Gold-flash

Drawing & testing report:

Please kindly check the following information to order right products.

DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26

1. Scope

This specification covers the requirements for product performance of 1.25mm pitch wire to board

connectors series.

2. Construction,Dimensions,Material & Plating

See the attached drawings

3. Ratings & Applicable Wires

Item Standard
Rated Voltage (Max.) 150V AC/DC Insulation O.D. 1.00mm (Max.)
Rated Current (Max.) And Applicable Wires AWG#26 1A AC/DC
AWG#28 1A AC/DC
AWG#30 1A AC/DC
Ambient Temperature Range -25℃ ~ +85℃*

*: Including terminal temperature rise

4. Electrical Performance

Test Description Procedure Requirement
4-1

Contact Resistance

 Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4) 30mΩ (Max.)
4-2 Insulation Resistance Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B) 500MΩ (Min.)
4-3 Dielectric Withstanding Voltage Mate connectors, apply 500V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301) No Breakdown.
4-4 Contact Resistance on Crimped Portion Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA. 5mΩ (Max.)

5. Mechanical Performance

Test Description Procedure Requirement
5-1 Actuator Insertion & Withdrawal Force Insert and withdraw connectors at the speed rate of 25±3mm / minute. Refer to paragraph 7
5-2 Crimping Pull Out Force Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) AWG#26 2.0kgf (Min)
AWG#28 1.0kgf (Min)
AWG#30 0.8kgf (Min)
5-3 Terminal Insertion Force. Insert the crimped terminal into the housing. 0.50kgf (Max.)
5-4 Terminal/Housing Retention Force. Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. 0.50kgf (Min.)
5-5 Pin Retention Force Apply axial push force at the speed rate of 25±3mm / minute 0.50kgf (Min.)
5-6 Durability When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. Contact Resistance 60mΩ (Max.)
5-7 Vibration

Amplitude: 1.5mm P-P

Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.

(Based upon MIL-STD-202 Method 201A)

Appearance No Damage.

Contact Resistance 60mΩ (Max.)

Discontinuity 1 μsec.(Max.)
5-8 Physical Shock 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

6. Environmental Performance And Others

Test Description Procedure Requirement
6-1 Temperature Rise Carrying rated current load.(Based upon UL 498) 30℃(Max.)
6-2 Heat Resistance 85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)

Appearance No Damage.

Contact Resistance 60mΩ (Max.)
6-3 Cold Resistance -25±3℃,96 hours (Based upon JIS C0020)
6-4 Humidity

Temperature: 40±2℃

Relative Humidity : 90~95%

Duration: 96 hours

(Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)

Appearance No Damage.

Contact Resistance 60mΩ (Max.)

Insulation Resistance 50MΩ (Min.)

Dielectric Withstanding Voltage Must meet 4-3
6-5 Temperature Cycling

5 cycles of:

a) -55℃ 30 minutes

b) +85℃ 30 minutes

(Based upon JIS C0025)

Appearance No Damage.

Contact Resistance 60mΩ (Max.)
6-6 Salt Spray Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B)
6-7 SO2 Gas

24 hours exposure to 50±5ppm.

SO2 gas at 40±2℃.
6-8 NH3 Gas 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.
6-9 Solderability

Soldering Time: 5±0.5 sec.

Solder Temperature: 245±5℃

 Solder Wetting 95% of immersed area must show no voids, pin holes
6-10

Resistance to Soldering Heat

(DIP)

Solder pot method

Soldering time: 10±0.5 sec.

Solder Temperature: 260±5℃

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

 Appearance No Damage.
6-11 Resistance to Soldering Heat (SMT)

When reflowing

Refer to paragraph 8

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

 Appearance No Damage.

7. Actuator Insertion/Withdrawal Force

DIP&Single Row SMT [Unit : kgf] Dual Row SMT [Unit : kgf]

Circuits At Initial Circuits At Initial
Insertion (Max.) Withdrawal (Min.) Insertion (Max.) Withdrawal (Min.)
Single 0.30 0.03 Single 0.30 0.03
02 2.00 0.50 2X05 3.50 0.90
03 2.50 0.55 2X06 4.10 1.00
04 3.00 0.60 2X07 4.70 1.10
05 3.50 0.65 2X10 6.50 1.40
06 4.00 0.70 2X15 9.50 1.90
07 4.50 0.75 2X18 11.30 2.10
08 5.00 0.80 2X20 12.50 2.40
09 5.50 0.85 2X25 15.50 2.90
10 6.00 0.90
11 6.50 0.95
12 7.00 1.00
13 7.50 1.05
14 8.00 1.10
15 8.50 1.15

Our Services
1.Quality is life, we establish our brand step by step (high quality).
2.Competitive price.
3.Attractive package.
4.Fast Delivery.
5.Excellent after-sale service.1.Quality is life, we establish our brand step by step (high quality).
2.Competitive price.
3.Attractive package.
4.Fast Delivery.
5.Excellent after-sale service.
6.Feel free to join our team and establish business relationship between us.
7.Welcome to inquiry us and send you our catalogue to know what we have.
6.Feel free to join our team and establish business relationship between us.
7.Welcome to inquiry us and send you our catalogue to know what we have.

Product tags

pcb wire connector

,

pcb to wire connector

,

4 gauge wire connector
Send your message to this supplier
Send Now

DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26

Ask Latest Price
Product Detail
Brand Name :
HRT
Model Number :
A1252-T
Certification :
ISO9001/ ISO14001/UL/RoHS/REACH
Place of Origin :
China
MOQ :
75KPCS
Price :
Negotiated
Contact Supplier
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26
DF13 wire to board connector terminals tin-plated Crimping Connector for Discrete wire AWG 30 to 26

RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

Active Member
10 Years
guangdong, shenzhen
Since 2004
Business Type :
Manufacturer, Exporter
Main Products :
Circuit Board Wire Connectors, Wire To Board Connectors, Wire To Wire Connectors
Total Annual :
20,000,000-24,999,999
Employee Number :
100~149
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Wire Connector Terminals
MachineU China Products Electrical Equipment & Supplies Connectors & Terminals Terminals
Contact Supplier
Submit Requirement