MachineU > China Products > Tools & Hardware > Hand Tools > Hammer
5.5 R. C. DTH Hammers Pr54 Spray-Paint of Customization with Spray-Paint
5.5 R. C. DTH Hammers Pr54 Spray-Paint of Customization with Spray-Paint
5.5 R. C. DTH Hammers Pr54 Spray-Paint of Customization with Spray-Paint
5.5 R. C. DTH Hammers Pr54 Spray-Paint of Customization with Spray-Paint
5.5 R. C. DTH Hammers Pr54 Spray-Paint of Customization with Spray-Paint
5.5 R. C. DTH Hammers Pr54 Spray-Paint of Customization with Spray-Paint
Specifications
Model NO. :
CPR54
Surface Treatment :
Spray-Paint
Manufacturing Process :
Forging
Material :
Alloy Steel
Transport Package :
Ply-Wooden Cases for Exporting
Specification :
2 Inch to 12 Inch
Trademark :
Super Diamond
Origin :
China
HS Code :
8207199000
Supply Ability :
10000
Customization :
Available
Certification :
ISO 9001:2000
Standard :
JIS, ASTM
Description
5.5" R.C. DTH Hammers PR54


Advantages:
R.C.Drilling, referred to as " Centre Sample Recovery" or " Dual Wall Drilling",employs a Dual Wall Pipe where the drilling medium, normally high pressure air,is passed between the outer and inner tubes down to the face of drilling bit where it is returned up the centre tube along with the sample cut by the drill bit.

1. No contamination
The R.C. System collects sample through the recovery holes in the face of the drill bit immediately as the cuttings or sample is formed.The drilled sample does not have to travel the length of the harmmer where contamination and loss of sample takes place.

2. Higher Production
In broken and fractured ground conditions, the R.C.will often out perform the conventional hammer in terms of penetration rates.

3.Dry Sample
Even in certain water bearing stratas it is still possible to collect a dry sample because the cutting (sample) are collected as they are formed throught the face of the drill bit.

4.Higher Sample Recovery
Because the sample is collected through the face of the drill bit there is no loss of sample when drilling through broken or fractured ground. And since the bit matched to the chuck size, there is very little by pass of sample and recovery rates of up to 98% are generally achievable.

Products specifications:
Send your message to this supplier
Send Now

5.5" R. C. DTH Hammers Pr54 Spray-Paint of Customization with Spray-Paint

Ask Latest Price
Product Detail
Model NO. :
CPR54
Surface Treatment :
Spray-Paint
Manufacturing Process :
Forging
Material :
Alloy Steel
Transport Package :
Ply-Wooden Cases for Exporting
Specification :
2 Inch to 12 Inch
Contact Supplier
5.5 R. C. DTH Hammers Pr54 Spray-Paint of Customization with Spray-Paint
5.5 R. C. DTH Hammers Pr54 Spray-Paint of Customization with Spray-Paint
5.5 R. C. DTH Hammers Pr54 Spray-Paint of Customization with Spray-Paint

Changsha Chaojingang Machinery Manufacturing Co., Ltd.

Verified Supplier
1 Years
changsha
Since 2017
Business Type :
Manufacturer, Exporter
Main Products :
High Air Pressure DTH Hammer, Reverse Circulation Hammers, Reverse Circulation Bits
Total Annual :
13000000-14000000
Employee Number :
100~200
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Reverse Circulation Hammers
MachineU China Products Tools & Hardware Hand Tools Hammer
Contact Supplier
Submit Requirement