Tunnel Kiln With Refractory Bricks Design And Supplier

Tunnel Kiln for Clay Brick Making Tunnel Kiln with Refractory Bricks Red Clay Bricks Tunnel Kiln Design and Supplier

System of Tunnel Kiln for Clay Brick Making Tunnel Kiln with Refractory Bricks Red Clay Bricks Tunnel Kiln:

The Tunnel kiln is flat celling type.

Tunnel kiln has automatic coal powder adding system, smoke-releasing system,exhausting system under the kiln cart, cooling system under the kiln cart, gas burning system, waste-heat system, rapid cooling system and back pressure system(pressure balancing system).Baking curve inside of the kiln will be more reasonable through the adjustment of these systems.

There are 3 doors at both ends of the tunnel kiln. At the entrance side, there is a preparatory room, and a cut-off door between the preparatory room and the kiln joint zone. Thus it effectively avoid entering the cold air and ensure the baking system of the kiln.

Structure of Tunnel Kiln for Clay Brick Making Tunnel Kiln with Refractory Bricks Red Clay Bricks Tunnel Kiln:

Tunnel Kiln Foundation: The kiln foundation is based on the entire board. From the bottom up, plain concrete cushion + reinforced concrete beam (track beam)/board (under kiln wall);

Tunnel Kiln Wall: Tunnel kiln pre-firing and cooling zone: The wall of the area, in which the temperature is below 200°C, is made of red bricks; the rest is composite wall, ie the innermost layer of the kiln wall for firing zone and insulation zone is constructed with primary/secondary refractory clay bricks. The insulation layer is filled with aluminum silicate fiber carpet, light clay insulation brick, aluminum foil and expanded perlite from the outside to the inside, and the exterior wall is made of red bricks;

Tunnel Kiln Roof:At the two ends of the kiln, one parking space is reserved for cast-in-site concrete ceilings; in other places, a combination structure is formed bottom-up by fire-retardant bricks, fire-resisting suspension bricks, 304 heat-resistant hooks, and I-beam hoisting beams. The weight is carried by the sintered brick walls on both sides. Refractory fiber blankets, rock wool blankets, aluminum foil and thermal insulation mortar are used to form a composite thermal insulation layer on fire bricks.

Specifications of ​Tunnel Kiln for Clay Brick Making Tunnel Kiln with Refractory Bricks Red Clay Bricks Tunnel Kiln:

Construction of ​Tunnel Kiln for Clay Brick Making Tunnel Kiln with Refractory Bricks Red Clay Bricks Tunnel Kiln: