30-Layer Dust Removal Sticky Mat, 1.55-1.8mm Thick, Anti-Static, Reusable, Blue

Product description

This product is mainly suitable for sticking to the entrance or buffer zone of the need for dust purification space, it can effectively stick to the dust on the soles and wheels, minimize the impact of dust on the quality of the purification environment, so as to achieve the effect of simple dust removal, and solve the problem that the dust removal of other floor MATS is not completely unable to ensure the dust non-proliferation.

Detailed parameters

The base materia	35 ~ 50 mu m thick coating PE
The gluing thickness	5～7μm
The layer number of the product	30 / piece
The thickness of the product	1.55～1.8 mm/
Product color	Blue or white
Dedusting effect	99.9%
180 degree stripping strength	300g-350g / 25mm (gb2792-98) viscosity increases or decreases
At the beginning of viscous fluid	> 50mm (gb4852-2002 stickiness test method, ball bearing method)
A viscous	1440(24h)(GB4851-98)
Product specification	18″×36″,24″×36″ ,24″×45″,26″×45″
Remark: the specification can be made according to customer's requirement.

Features:

1. Soft material: The surface is very smooth and has a microscopic surface, which can be easily glued to the surface to contact with different sizes of dust, especially the uneven small concave parts of the sole and wheel.
2.The adhesive pad can be used alone or in combination with the frame. The bottom pad can be removed, leaving no trace and not polluting the environment.

3.The material is non-toxic, environmental protection, practical use effect is good, without any side effects.

4.Easy to clean: can be cleaned with water or alcohol, wood

Usage

Sticky dust mat can effectively prevent pollutants and particles from entering the strictly required working environment due to the flow of personnel, and keep the working environment clean.
Each sticky dust mat is composed of multiple layers of polyethylene adhesive compound, each layer is accompanied by a high viscosity coating, smooth and durable, easy to use, after the surface is contaminated, the layer can be torn off.
The products are suitable for electronic, computer, LCD, instrument equipment, optics, medical equipment, pharmaceutical, aerospace and nuclear industries.

Schematic diagram for cleanroom sticky mats