H13 HEPA Filter Boxes
Cleanroom Terminal HEPA Filter Housing Cassette H13
The HEPA Replacement Air Filter ensures it yields only clean filtered air from the filter face, when connected to a duct system or fan via its spigot connection on the rear of the filter.
the cassette casing is the integral case of the HEPA filter as well.
(No clamping pressures, gasket seals and the quality of the sealing mating face, associated with the traditional Terminal Housing.)
Once connect to the round inlet duct , only filtered air can leave the filter, as individual testing before leaving factory
casing:extruded Aluminum frame
ceiling connect plate: galvanized or cooled-roll steel
Sealant:polyurethane
separator:Hot-melt
Gasket:EVA 5mm
Filter media:mini pleat Glass fiber
thermal insulation PEF fiber : on request
distribution plate: on request
Duct: 8cm height,
Diameter : 250 mm (10 inches )or 300 mm(12 inches )
(others duct diameter or request ; inlet collar designed
with continuous rib to help retain the ductwork on collar.)
Use the highest temperature, humidity:80℃,80%
Optional: Alternative frame materials and size available on request.
|
Outside dimensions (mm) |
Rated air flow (m3/h) |
Initial resistance (Pa) |
Efficiency (%) |
Dust capacity (g) |
CYH-10J |
610×610×150 |
1000 |
≤220 |
≥99.99 |
600 |
CYH-15J |
915×610×150 |
1500 |
≤220 |
≥99.99 |
900 |
CYH-18J |
1170×570×150 |
1800 |
≤220 |
≥99.99 |
1070 |
CYH-20J |
1220×610×150 |
2000 |
≤220 |
≥99.99 |
1200 |