ISTA Standard High Acceleration Mechanical Shock Tester Battery Shock Impact Tester

ISTA Standard High Acceleration Mechanical Shock Tester Battery Shock Impact Tester Application:
Acceleration Shock Tester is mainly used for small products for impact test, to assess the product’s ability to withstand shock damage. It is often used in electronic components, electronic circuit boards and other environmental testing.

ISTA Standard High Acceleration Mechanical Shock Tester Battery Shock Impact Tester Technical Parameters:

ISTA Standard High Acceleration Mechanical Shock Tester Battery Shock Impact Tester​ Features:

1.Built-in self-protection device, no secondary impact,
2.Shock height controlled by digital
3.Good repeatability test data
4.Signal generator provides a variety of choice: half sine wave, trapezoidal wave, sawtooth wave, square wave, etc.
5.Good vibration isolation performance, impact on the environment can control within the scope of the requirements:
6.Good Safety performance.
7.Conform to the IEC, MIL, GJB, JIS, ASTM and other international and domestic standard shock waves;

Adaptive digital filter:

Filter types: low-pass filter and high-pass filter can be used at the same time

Filtering characteristics: each channel can be set different filtering channel

Low-pass filter parameters: no filtering, no cut-off frequency, filtering ratio

High-pass filter parameters: no filter cut off frequency

Our service
1.High quality guarantee.
2.Shipment with professional documents.
3.Packing as your request, with photo before shipment.
4.Reply within 48 hours and provide solution within 3 working days
5.Professional after-service from our engineers.
6.Warranty period 12 monthes.

Our advantages
1.Professional technology support.
2.Full experience of large numbers containers loading in Chinese sea port.
3.Fast shipment by reputed shipping line.
4.Best service after shipment with emails.
5.We are professional test equipment manufaturer in China with excellent experience and skills, also have best quality products

For the package:
1. PP film first
2. Vacuum package
3. PP film again
4. 10mm thickness PU foam to avoid collision
5. stronged plywood case
6. Standard ASLI CASE MARK

Short introduction about ASLi factory:

We are a long history testing equipment manufacturer, in the past 28 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine. 1.5~30ms Mechanical Shock Test Machine, Ce Certificate Acceleration Shock Tester is our star products , and we had obtained the CE certification for this machine .