walkin humidity and temperature test chamber THR-6...
Walk in Constant Temperature Humidity Environmental Test Chamber with Environmental Protection Refrigerantis suitable for industrial products for humidity and heat test, high temperature test, low temperature test and high and low temperature gradual test, with a wide range of limit temperature (humidity), the actual temperature (humidity) degree of high precision characteristics, walk-in laboratory, large studio for a variety of components, the whole machine to do temperature and humidity test. Studio size can be customized by customers.
1 Product Name
1-1 Product Name: walk-in temperature test room
2 Main Technical Parameters
2-1 Dimension: According to customer's requirements
2-2 Material : SUS#304ss
2-3 Temperature :-40°C~150°C (according to customer's requirements)
2-4 Temperature Indication Resolution: ±0.1°C
2-5 Temperature Control Accuracy: ±0.5°C
2-6 Temperature distribution uniformity:±2°C
2-6 Humidity: 20%~98%R.H (according to customer's requirements)
2-7 Humidity Indication Resolution: ±0.1%R.H
2-8 Humidity distribution uniformity: ± 5.0%R.H
3 Air Supply Systems for Environmental Chamber
3-1 Air Cycling Device: centrifugal fan, externally installed motor drive
3-2 Heating Mode: wire heaters made of a material called Nichrome; PID & SSR control
3-3 Cooling Mode: air/ water cooling
3-4 Humidification Mode: Stainless steel steam humidification; water purifier is provided for automatic water supply while being connected to the chamber
3-5 Dehumidification Mode: by compressor& de-humidify device
4. simulate constant temperature and humidity environmental test chamber walk in style construction
4-1 Console Model Chamber:
4-1-1 The workspace is located at the left side or as to the user requirements;
4-1-2 Refrigeration unit cabinet located in the right side;
4-1-3 Electric control part is placed in the refrigeration unit cabinet, with operation panel on the front Chamber exterior is made of cold rolled steel with powder-painted, interior is stainless steel SUS304 #;
4-1-4 Thermal insulation material is flame retardant polyurethane rigid foam, of 100-150mm thickness.
4-2 Refrigeration Unit Cabinet:
4-2-1 Located in the right side of the chamber, and refrigeration compressors are installed on its frame,
4-2-2 Special door for maintenance & repair is provided.
4-2-3 Acoustical boards are used for lowing noise to maximum limit.
4-3 Chamber door:
4-3-1 Single door or double door, or according to customer’s requirement
4-3-2 Silicon rubber is used for high sealing effect, high / low temperature resistance, anti-aging, and good Sealed performance.
Oversea Service:
If you need more information about Walk in Constant Temperature Humidity Environmental Test Chamber with Environmental Protection Refrigerant, please feel free to send your inquiry.