Environmental Stress Screening compound altitude, temperature, humidity chamber
Product Description:
Altitude Test Chamber Specification:
Model | SM-VTH-250-CC | SM-VTH-500-CC | SM-VTH-1000-CC | SM-VTH-2000-CC | |
Temperature | Temperature control range | -70℃~180℃ (A:0℃~180℃;B:-20℃~180℃;C:-40℃~180℃;D:-70℃~180℃) | |||
Temperature fluctuation | ±0.5℃ | ||||
Cooling rate | 180.0℃~-70.0℃ Within 120mins (1.0~2.0℃/min) | ||||
Heating rate | -70.0℃~180.0℃ Within 100mins (2.0~3.0℃/min) | ||||
Temperature uniformity | ±1.5℃ (-40.0℃~100.0℃) | ||||
±2.0℃ (100.1℃~180.0℃or-40.0℃~-70.0℃) | |||||
Pressure | Pressure range | Normal pressure~0.5kpa(500pa) | |||
Pressure error | ±2kpa(>40kpa),±5%(2kpa~40kpa),±0.1kpa(<2kpa) | ||||
Depressurization time | Normal pressure~1kpa,about 30 mins; | ||||
Pressure recovery time | <10kpa/min | ||||
Humidity | Humidity control range | 20.0%RH~98.0%RH(work under atmospheric humidity) | |||
Humidity fluctuation | ±2.0% RH | ||||
Humidity uniformity | ±5.0%RH | ||||
Material / components | Internal material | Adopt 2mm thickness stainless steel plate (SUS304) | |||
External material | Adopt 10mm thickness cold rolled steel plate fully welded / powder sprayed | ||||
Heat insulating material | 100mm thickness polyurethane plate+10mm thickness mineral wool | ||||
Fan | Centrifugal blower | ||||
Compressor | France Tecumseh, Germany Bock, Germany Bitzer | ||||
Condenser | Air cooling, water cooling | ||||
Refrigerant | R404A,R23,R508 | ||||
Evaporator | Fin - and - Tube Heat Exchanger | ||||
Heater | Nickel chromium alloy heating wire | ||||
Humidifier | Steam humidifier | ||||
Size | Inner size(mm) W*H*D | 550*600*700 | 700*800*900 | 1000*1000*1000 | 1400*1200*1200 |
Outer size(mm) W*H*D | 2000*1060*1900 | 2500*1260*2050 | 2720*1460*2130 | 3150*1650*2050 | |
Volume(L) | 250L | 500L | 1000L | 2000L | |
Operating ambient temperature | +5 ~ 35℃ | ||||
Power supply | 380V AC 50/60Hz | ||||
Controller | SANWOOD SH5600:Equipped with RS232 port;(7.0 inch controller)USB data export ) |
RELATED PRODUCTS
1. Temperature & humidity test chamber ( Temperature range: -75℃~+180℃,Humidity range: 10%~98%)
2. High low temperature test chamber( Temperature range: -75℃~+180℃)
4. Xenon lamp accelerated aging test chamber
5. Ozone accelerated aging test chamber
6. Thermal shock test chamber( Two-zone type and three-zone type)
7. ESS test chamber (Ramp rate: 5℃/min, 10℃/min, 15℃/min)
8. Salt spray corrosion test chamber
11. Temperature & altitude chamber
Product Catalog:
Walk-in Type Battery Explosion-proof High and Low ...