1. Introduction

The constant temperature and humidity test chamber is widely used in scientific research, research institutes, quality inspection institutes and other industries to do warm and humid heat tests of electronic and electrical products, materials, parts, equipment, etc., alternating heat test and constant temperature test, etc. Also could do high and low temperature routine tests, low temperature storage, in order to evaluate the performance of the sample under given environmental conditions.

It's widely used for industries of Electronic and Electric, Equipment and Instrument, Plastics & Rubber, Construction, Communication, Research and institute, Energy and Laboratories, etc.

2. High temperature limits of test chambers

There are many types of test rooms, but they all have high and low temperature limits. Let's take a look at the typical high temperature thresholds and why they exist.

The test chamber typically has a wire heater made of a material called Nichrome. By placing a continuous heating bead, a greater amount of heat is produced. The result looks like a toaster inside. The fan circulates the air through the heater, so the indoor sample is not exposed to radiant heat. It is very easy to add a heater and increase the speed and / or upper limit of the chamber.

The SANWOOD chamber typically has a high temperature limit below 200 ° C. This is why a room of high temperature restrictions exist in the decomposition

3. Standard Met and Implemented

GB/Bb T2423.2-89 high temperature test method

GB2423.1-89 test A: low temperature test method

GJB150.4-1986 test at low temperature

IEC60068-2-1 low temperature test method

IEC60068-2-38 temperature cycle

IEC60068-2-78 constant humidity temperature

MIL - STD - 202G - 103B humidity test

IEC60068-2-30 humidity temperature cycle

GB/T2423.3 constant humidity heat test method

4. Temperature Humidity Test Chamber Parameter Specifications

The specifications is measured in the environment of + 25 ℃, temperature and humidity performance measurement comply with related regulation of IEC 60068-3 standard; Sensors placed in the air outlet.

5. Chamber details

Chamber Front view

Observation window: tempered glass with lighting

15L drawer type water tank, located in front of the machine, under the door.

Stainless steel sample holder 2 layers, height is adjustable, load-bearing (uniform): 20kg/layer

Our circuits are arranged in accordance with international UK standards and are equipped with complete circuit diagrams. Each line has a clear line number, which is clearly defined and clearly defined. We use electrical components of internationally renowned brands, such as France Schneider, Switzerland Carlo Gavazzi ,Japan Mitsubishi, Korea Rainbow, Korea SAMWONTECH and so on.

Unique self-made polished door lock design, using the principle of leverage, the door is closed and easy to operate, reliable, stable, durable, easy to operate, long life.

Unit module standardization: Convenient installation, commissioning and subsequent maintenance are more convenient and cost-effective.