Carbon Structural Steel Plate, Manufacturer Iron Sheet Metal High Quality High Strength Carbon

What is carbon steel plate?

Mild steel is considered the most economical grade, with excellent ductility and toughness. Because mild steel sheets or also known as low temperature carbon steels are softer, they are best suited for low temperature applications

On the other hand, compared to low carbon steel, medium carbon steel has better mechanical properties due to the properties of quenching and tempering after heat treatment. Commonly used in applications involving vessels, heat exchangers, oil and gas pipelines, and underground pipelines. Inactivated carbon or fully deoxidized steel plates contain no oxygen, thus eliminating room for corrosion

Deoxidation of fully killed carbon steel coils is achieved by adding silicon, aluminum or other deoxidizers to the molten alloy. Black carbon ribbon is made of non-galvanized steel, unlike regular carbon steel, which uses galvanized steel to prevent corrosion

The carbon steel grade is a module designed with a high carbon content. Carbon steel sheets have a carbon content between 0.5 and 2.1 weight percent. These boards exhibit superior strength with enhanced resistance and tolerance. The CS board is designed to be thicker than 6mm and can extend to 100mm or more. These boards are very strong and provide optimum stability and support for different applications. opposite of this

Carbon steel sheets are produced in thicknesses below 6mm but above 0.5mm. These components add an aesthetic appearance to different applications. These sheets are not required in applications requiring stability and strength. Carbon steel strips are designed for thicknesses from 0.2mm to 0.5mm. These strips act as filler material in a wide range of welding operations. 1018 steel plate is the most common grade of carbon steel produced by the cold rolling process. These plates are versatile and have excellent mechanical properties and hardness. Cold rolled carbon steel sheets have higher strength and tolerances than hot rolled sheets. These components are processed at room temperature and are very durable

The design carbon content of high carbon steel sheet metal is 0.55% and above. Metal grades exhibit exceptional strength and are resistant to wear due to their hardness. This metal is the first choice for cutting tools and machinery for bending metal. Conversely, mild steel sheets have a carbon content of 0.05% to 0.3%. These sheets do not have the same hardness and strength as high carbon sheets, but are highly ductile and exhibit enhanced formability. Mild steel sheet is a viable solution in applications where moderate strength and light weight are required. For any questions and issues regarding our products or carbon steel diamond plate, please contact us for more information

product description

Product Image