Light Duty Series Automatic Pipe Bending Machine Applying To Shipbuilding Industry

-- Description of machine

This series adopts VDU touch screen operation panel to control, can input, store and display various bent pipe data and instructions. Each axis servo of the machine tool under the control of the industrial computer realizes full-automatic fast feed, transfer, head movement, automatic multi-layer die change, automatic coreless and coreless bending.

And it has part bending back compensation and faults advanced features such as self-diagnosis alarm, power-off memory, automatic lubrication and safety protection. It has many advantages such as reasonable structure, safe use, convenient operation, reasonable price and multi-purpose use. It consists of electric oil pump, high pressure oil pipe, quick connector, working oil cylinder, tightening device and a series of elbow parts. The high-pressure oil that is output by the electric oil pump is sent into the working oil cylinder through the high-pressure oil tube.

-- Installation points

1. The ground of this machine needs to be leveled. After it is placed, it should be adjusted to the body without shaking. The principle of not oscillating when moving, it is best to use expansion bolts to fix on the ground.
2. Before connecting to the power supply, make sure the voltage of the customer's power supply is consistent with the machine.
10%, regulators should be installed, the power supply must have a perfect grounding.
3. When the power is turned on, first check whether the direction of the oil pump motor is the same as the direction of the indication. After pressing the “Oil Pump Start” button, confirm whether the system pressure gauge reaches 70Kg/cm2 immediately after the oil pressure starts (normal working pressure range should be ≤ 12MPa). If the oil pump is running and the system has no pressure, it means that the motor runs in reverse. Please adjust any two wires in the three-phase power cable.
4. After the oil pump is started, before the return of the original point, the main clips, guide clips and auxiliary push buttons on the operation panel can all be operated. In this case, please remove the debris and obstacles on the machine and press the "Home Return Start" button. At this point, the screen displays the screen during the 3-axis zero point return operation. When completed, it automatically jumps to the operation mode selection item page.

-- Operating system instruction

Automatic mode interface. The automatic mode is that after the equipment has been manually adjusted (including mold, function, and parameters), the equipment can automatically carry out mass production of tubes.
1. File Name: Displays the name of the currently machined workpiece number.
2. A total of several bends and several bends, showing the effective number of bends and the current number of bends required for automatic bending.
3. Set value: Shows the value of Y feed, B corner, and C elbow in the fitting programming.
4. Current value: current Y feed, B corner, C bend value.
5. Elbow timing: The time taken for a tube to pass from the tube to completion of processing.
6. The preset output sets the number of pipes to be processed; the current output shows the number of completed pipes; it helps the user to master the production schedule. Press Zero to zero the current yield.
7. Before the automatic operation, you must first press the "Start" button, then follow the text prompts at the bottom of the interface to start the foot switch. If you need to pause during automatic operation, you can press the “pause” button or pause the foot switch, and then press “pause” or pause to stop the pedal switch to continue running. If “decomposition action” is ticked, the foot pedal must be pressed to start the next action every time you complete a step in the automatic operation.
8. In this interface you can switch to manual mode, single-bend mode, file management, I/O mode, or back to homepage (open machine interface).

-- Main technical parameter

-- Company service

1. Payment terms: 30% T/T down payment and 70% T/T before shipment.

2. Delivery time: No later than 15 days since receiving the advance payment.

3. Validity of the price: For ONE month.

4. Package: Wooden case.

5. Warranty period: We guarantee machine quality for 12 months. During this period, if spare parts of the machine were damaged, we can send the component to the customer by international express service freely.

-- Pictures of machine