5.5 KW Air Cooling Spindle Weihong NK105 Control System 3 Axis CNC Router Machine with 1300 * 2500 mm table

This type 3 axis CNC Router Machine is the most high cost performance type, 1300 * 2500 mm table could meet almost materials size, over 50% clients choose this machine.

Advantage:

1. T-slot Table with two PVC layers, could fit the materials well;

2. 5.5 KW Air cooling spindle could make sure the working speed;

3. Weihong Control handle operated simply, don't need trainning;

4. Ball screw transmission could make sure the accuracy;

5. Square rails could use five years without wear;

6. Overseas service could guarantee your using experience.

Overview

Cnc router is called Computer Numerical Control Router too, works under control by computer on various materials, such as wood, acrylic, composites, auminium, steel, plastics and foam.

A cnc router has many functions like engraving, carving, cutting, drlling. It could perform the tasks of lots of carpentry machine, such as the panel saw, the spindle moulder, the leather machine, the boring machine etc. They can also cut mortises and tenons.

Application

CNC Router is short for Computer Numerical Control Router, is controlled by computer to process on hard materials, such as acrylic, wood, stone, composites, steel, auminium, plastics and foam. A picture will be convert to vectors, and translated into G-code through Artcom etc software. You could see coordinates of the X, Y, Z axis, and monitor the working procesion, and stop it when necessary. A CNC router can reduce waste, frequency of errors, and the time the finished product takes to get to market.

This type cnc router machine has friendly interface control system, man could learn operating it easier, especially for fresher. The X,Y,Z Traveling Potioning Accuracy could reach less than 0.05mm, and the reposioning accuracy could reach less than 0.02mm. Running stably, cutting speed fastly, could finish complicated work.

Leadshine Stepper Moter and Driver

Leadshine stepper Moter and Driver is widely adopted in Chinese CNC router, It’s cheaper and high accuracy. It won’t lose step in working, speed performance increased about 30%, improve the equipment speed heavily. Motor heat fell down 30%,prolong the life time of the motor. Vibration phenomenon significantly reduced,motor run more smoothly. Adopted the current control system technology,save power consumption.

Inverter

Inverter is controler of spindle, it control the start, speed and stop of spindle. We usually adopt Taiwan Detla inverter and shanghai Fuling inverter.

Ball secrew transmission

Ball secrew transmission is slow but more stabile transmission type. Widely used in CNC router Z axis, and X, Y and Z axis for mini cnc router. It could provide powerful guarantee of machine’s accuracy and working life.