Forming Milling Cutter 45 Degree Solid Carbide Chamfer With Chamfering Tools End Mills

It is characterized by high machining efficiency, fast machining speed, high machining precision, good surface roughness of workpiece, high chip guide, high feed and long service time

1. This type of milling cutter is for aluminum alloy processing, has 2 / 3 flutes, flat and ball nose, without coating.

2. As the aluminum is softer, require high speed cutting. And our end mills for aluminum is single margin design, edge-line is very sharp, coating will make it dull. Besides, coating will lead to sticking to the cutters.

3. Milling cutter for aluminum owned good chipping discharge, suitable for high speed and large scale cutting.

4. Except carbide milling cutters, we produce other types products, such as drill, milling chuck, milling cutters, cutter heads, boring cutters, carbide inserts, etc.

5. Our products passing ISO9001:2015 certification, and we offer OEM and custom-made services. Any requirements, please contact us any time! Thank you !

End Mill Tool material composition:

1. Physical Properties:

a. Hardness greater than or equal to 92.6 HRA;

b. Density greater than or equal to 14.4g/cm³;

c. TRS greater than or equal to 3800 N/mm²;

d. Free of ETA phase condition;

e. No contamination by other materials;

f. Porosity = A02/ B00 / C00 ;

g. Uniform and consistent grain size. No grain size can be larger than specified.

h. Chromium carbide grain growth inhibitor only.

2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;

3. It's proposed cutting less than 65HRC;

Super raw material

1. Physical Properties:overview

a. Hardness greater than or equal to 92.6 HRA;

b. Density greater than or equal to 14.4g/cm³;

c. TRS greater than or equal to 3800 N/mm²;

d. Free of ETA phase condition;

e. No contamination by other materials;

f. Porosity = A02/ B00 / C00 ;

g. Uniform and consistent grain size. No grain size can be larger than specified.

h. Chromium carbide grain growth inhibitor only.

2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;

3. It's proposed cutting less than 65HRC;

With toughness superhard abrasive machining hard and hard, hard machining the minimal consumption, can be directly below 50 degrees for heat treatment of materials for the rough machining to fine processing, reduce the changeover times, saves the production schedules, stable and reliable, and chip removal is fast, and can be a long time to maintain its sharpness and abrasive tool shape, can not only guarantee the accuracy of the workpiece, and greatly improve the machining efficiency, and solve the problem of environmental pollution.

Extremely fine diamond material with high hardness can effectively cut burr, u-groove design at blade, large front Angle, effectively reduce cutting resistance, facilitate smooth chip removal and improve working efficiency under high precision.Welcome to JOEBEN cutter.

Q:Are you Manufacture?

A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.

We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.

Q: What is your delivery time?

A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.

Q: Can you produce non-standard tools?

A: Yes, we can produce non-standard tools as per your drawing.

We also can design tools for you as per your usage requirement

Q:What is your advantages?

A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.