Machining center rectangular T-slot wash cutter integral carbide tungsten steel non - standard T-slot milling cutter

[main parameters ] tungsten particles 0.2 mu m Germany, spiral Angle: 35 °, processing hardness: HRC55 °,

[suitable for processing materials] mold steel, cast iron, carbon steel, alloy steel, tool steel, stainless steel, titanium alloy, general iron and other materials.

[t-knife application] used for precision machining of t-groove, side groove, circular groove, plane, side, step, groove and so on.

【JOEBEN tool features 】

JOEBEN tool company has the following characteristics:

1, long service time, sharp edge design, combined with new coating treatment, the tool is not easy to wear;

2. Large choice, same blade diameter, different blade length and full length, convenient for different degrees of processing speed and distance;

3, wide processing materials, cast iron, stainless steel, carbon steel, hardened steel, graphite, composite materials, acrylic and other different hardness materials for precision processing;

4. It is not easy to break the blade. The blade adopts scientific structural design to maximize the rigidity and strength of the blade;

5. High machining efficiency, designed for precision and speed milling;

6, suitable for machine tools, shenbing CNC tools can be used in CNC, computer gongs, precision carving machine, CNC lathe or other machine tools;

7, high machining accuracy, the use of fine tungsten steel, precision CNC cutting edge grinding, coupled with coating processing, the production of precision tools, only the use of precision tools, combined with precision equipment production, can produce precision products.

Super raw material

1. Physical Properties:overview

a. Hardness greater than or equal to 92.6 HRA;

b. Density greater than or equal to 14.4g/cm³;

c. TRS greater than or equal to 3800 N/mm²;

d. Free of ETA phase condition;

e. No contamination by other materials;

f. Porosity = A02/ B00 / C00 ;

g. Uniform and consistent grain size. No grain size can be larger than specified.

h. Chromium carbide grain growth inhibitor only.

2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;

3. It's proposed cutting less than 65HRC;

Product composition:Tungsten steelF-ED-001 end mill Features

1. Suitable for aluminum alloy (≤ 65 HRC)

2. High performance alcr series coating,high temperature resistance and high wear resistance.

3. Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling.

Q:Are you Manufacture?

A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.

We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.

Q: What is your delivery time?

A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.

Q: Can you produce non-standard tools?

A: Yes, we can produce non-standard tools as per your drawing.

We also can design tools for you as per your usage requirement

Q:What is your advantages?

A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.