Chamfer End Mill Cutter High gloss aluminum milling cutter high finish tungsten steel milling cutter very fine grain hard

Highlights of milling cutter with high degree of finish tungsten steel milling cutter tiny grain of hard, new fine grain tungsten steel material has high wear resistance and strength, to belong to high hardness, high speed cutting application of universal milling cutter, the blade cover ALTIN nano coating, can on heat treatment of materials directly under 60 ° high-speed rough machining to finish machining, reduce the changeover times, improve efficiency, save the schedule.2 blade cutting groove is given priority to, 4 blade with lateral milling and face milling is given priority to, suggested that cutting HRC60 ° within the steel material.Through passivation technology, the tool adhesion particles are completely removed, the edge passivation, processing high hardness material is more convenient, anti-breakage edge, prolong the service life of the tool.Sharp blade, irregular special new thin blade sharp while ensuring the durable wear of the tool.

90 degree chamfer mill Features:

1. Suitable for Aluminum alloy (≤ 65 HRC)

2. High performance alcr series coating,high temperature resistance and high wear resistance.

3. Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling.

End Mill Tool material composition:

1. Physical Properties:

a. Hardness greater than or equal to 92.6 HRA;

b. Density greater than or equal to 14.4g/cm³;

c. TRS greater than or equal to 3800 N/mm²;

d. Free of ETA phase condition;

e. No contamination by other materials;

f. Porosity = A02/ B00 / C00 ;

g. Uniform and consistent grain size. No grain size can be larger than specified.

h. Chromium carbide grain growth inhibitor only.

2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;

3. It's proposed cutting less than 65HRC;

Super raw material

Super coating

Q:Are you Manufacture?

A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.

We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.

Q: What is your delivery time?

A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.

Q: Can you produce non-standard tools?

A: Yes, we can produce non-standard tools as per your drawing.

We also can design tools for you as per your usage requirement

Q:What is your advantages?

A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.