PCD polishing tool car burr precision processing of non - ferrous me Aluminium work piece Processing mobile phone frame​

overview

Polycrystalline diamond tool brittleness, the blade is very sharp, when the impact is easy to produce chipping edge, so as far as possible in the balance, no vibration of the working conditions, but also should be as far as possible to improve the rigidity of the workpiece and the tool and the whole system, increase its seismic capacity, cutting more than 0.05mm is appropriate.

High cutting speed can reduce the cutting force, while low speed cutting will increase the cutting force, so as to accelerate the tool chipping edge failure, so the cutting speed should not be too low when using single crystal diamond tool processing.

The contact between single crystal diamond cutter and workpiece or other hard objects in the static state should be avoided to prevent the cutting edge from being damaged and to avoid the stop of the cutting tool without leaving the workpiece

Diamond knife blade is easily damaged. When the blade is not working, protect it with rubber or plastic cap and place it in a separate knife box for safekeeping. Wipe the blade with alcohol before working

Maintaining the environment and machine performance stability, operator proficiency and other factors have an impact on the life of the tool.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.