Compatible WWD1686 180,000RPM KL180B High Speed Air Spindle PCB PRECISION DRILLING


Quick Detail:

PRODUCT DESCRIPTION

KL180B industry standard body style and tool holding system spindle replace for WW D1686-10; D1686-XX Full Range from 20,000 to 180,000 rpm, air bearing type in long life, spindle weight 3.6kg with Diameter tool 3.175mm and body size Ø 61.9,Max power 0.75KW, Collet torque(N.cm) >=120.

The Parameter of KL180B :

Air Pressure : 6.0 kgf/cm²
Coolant : Water oil
Fixed voltage : 210V
Fixed current : 4A
FREQUENCY (HZ) : 334-3075

Competitive Advantage :

Low Static
Low Dynamic RUN OUT
Stable character and long life
Power and very low heat generation

Good slot and big hole drilling

Less running costs

ATC feeder / ATC tool change for micromachining

Environment friendly


KLKJ Advantage

The higher spindle speeds available allow for increased productivity whilst ensuring that accuracy and repeatability is
maintained.
Advanced analysis and detailed design has created a spindle with exceptional reliability and increased efficiency.
KLKJ increased productivity and efficiency available allows mass production drilling and routing spindle.

APPLICATION :

PRINT CIRCUIT BOARD PRECISION DRILLER
2 HEAD OR 4 -6 HEAD DRILLER
HOLE RANGE : Ø6.35mm-0.05mm
MACHINE REFERENCE : SCHMOLL POSALUX KLG PLURITEC KLINGEINBERG LENZ EXCELLON HITACHI


SPECIFICATION:

SPINDLE OUTLINE DRAWING



Why choose KLKJ?

With nearly 15 years technology in spindle maintenance, 10 years success experience for spindles parts production, and 9 years spindle R&D, KLKJ succeed in offer air bearing spindle up to 200krpm.

All spindles at the KLKJ are fully checked and tested using stringent quality control procedures. KLKJ ensures every repaired spindle passes the following points to make it in long life and stable character :

1. Air flow
2. Water flow
3. End float/lift off
4. Axial load (inner)
5. Axial load (outer)
6. Torque
7. Static RUNOUT
8. Dynamic RUNOUT
9. Motor check
10. Vibration
11. Material analysis & strictly quality test detection control
12. Stringent tolerance control