Compatible WWD1822 200,000RPM KL200P1 PCB Drilling Spindle

Quick Detail:

PRODUCT DESCRIPTION

KL200P1 high frequency spindle replace for WW D1822 or For WWD1686 Full Range from 20,000 to 200,000 rpm, air bearing type in long life, spindle weight 3.9kg with COLLET size Ø1/8” and body size Ø 61.9

Max power:0.85KW

Air Pressure: 6.0 -6.5kgf/cm²

Coolant:Water oil

Fixed voltage:200V

Fixed current:3A

FREQUENCY (HZ): 334-3350

PTC or NTC Sensor for choose

Square wave available

Competitive Advantage:

Low Static

Low Dynamic RUN OUT

Stable character and long life

Suitable for precision drilling

Air bearing type offer Greater Precision, High Speed , Increased Tool Life, Improved Surface Finish, Long Bearing Life, Low Thermal Growth, Lack of Maintenance, Large Load Capacity , Reduced Vibration , Cleanliness.

APPLICATION :

PRINT CIRCUIT BOARD PRECISION DRILLING

HOLE RANGE: Ø6.35mm-0.05mm

MACHINE REFERENCE:KLINGINBERG PLURITEC ；HITACHI ；LENZ ；ANDERSON ;SCHMOLL….

SPECIFICATION:

Compatible D1822 200,000RPM KL200P1 SPINDLE DRAWING

Why choose KLKJ?

With nearly 15 years technology in spindle maintenance, 10 years success experience for spindles parts production, and 9 years spindle R&D, KLKJ succeed in offer air bearing spindle up to 200krpm.

All spindles at the KLKJ are fully checked and tested using stringent quality control procedures. KLKJ ensures every repaired spindle passes the following points to make it in long life and stable character:

1. Air flow

2. Water flow

3. End float/lift off

4. Axial load (inner)

5. Axial load (outer)

6. Torque

7. Static RUNOUT

8. Dynamic RUNOUT

9. Motor check

10. Vibration

11. Material analysis & strictly quality test detection control

12. Stringent tolerance control