WE ARE MANUFACTURING OF ROOFING SHEET MAKING MACHINE IN SINGLE LAYER, DOUBLE LAYER, TRIPLE LAYER AND ALSO ROOF RELATED ALL TYPE OF ASSECCORIES .

Product Description
D coiler 5 ton cap.
Entry Gate with
Roll Forming Line with 23 station , 10 H.P. electrical.
Control Panel
Cutting Unit (Hydro.)
Technical Specifications
Maximum sheet width that can be formed : 1450 mm
Maximum sheet thickness in PPGL/PPGI/NCGI Strips that can be formed : 0.3 to 0.8 mm
Horizontal distance between shafts : 500mm
Number of forming stations : 23 nos.
Total HP for Line : 15
Speed of the machine : 0 -25 mt / minute
Size of machine : 9500 x 1700 x 1100 mm
Mandrel Uncoiler
Coil weight : 5 MT Max
Coil width : 1450 MM
Coil bore : 450 MM min, 510 MM max dia.
Mandrel movement : Manually adjusted
Back Tension : Manually adjusted

Entry Gate
Entry gate will be provided for movement of sheet to roll former.

Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts
The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive
The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

Tooling
One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.

Cutting Unit (Hydro)
Hydraulically operated power pack along with cutting die with 3 HP electrical.