2. Product Overview

After 3 years of technical research, the company’s technical research and development department has developed servo flexible bending center with cutting-edge technologies. The speed is only 0.2 second per bending motion. The equipment can automatically bend up and down according to the bending programming to achieve an arc, The combination of flattening bending and various angles saves a lot of labor and tool costs for processing.

The max. size of the panel processed is 2500mmx1250mm, and the system controls up to 10 axes -X, Y, C, V1, V2, Z1, Z2, W1, W2, and P.

3. Main Technical Parameters

Note: The angle range for thick panel bending is from negative 90° to positive 90°.

4. Main Component Configuration

5. Thickness Range of Sheet Metal (Can be customized)

6. Frame and Bending Demo

Frame

◆Servo flexible bending center frame. The frame adopts high-strength welding structure, the main structure is stable with a long service life.

◆Heat treatment to remove internal stress, strong rigidity, heavy tonnage, ensuring long-term stability of the machine accuracy, and improving the bending accuracy, reliability and durability of the bending center.

Bending Demo

◆Downward Bending ◆Upward bending

Taiwan HIWIN Bead Screw

Rexroth Linear Guider

Japan NSK Bearing

7. Documents, Tools and Spare Parts

1. Documents

2. Tools and Spare Parts

8. User Preparation

1. Power supply: 380V, 50HZ, the voltage fluctuation is -5%～+10%; when the voltage fluctuates greatly, the user must be equipped with a voltage stabilizer, otherwise it will cause the low-voltage electrical appliance to be in an abnormal working state, and the life of the electrical device will be reduced or Problems such as damage, scrapped processed products, stopping of work caused by motor alarms, and damage to computer hard disks.

2. Air source: output 0.6Mpa or more, dry and clean compressed air, air supply volume 0.3m3/min; if the air is not dry enough, the user should be equipped with a refrigeration dryer, otherwise there will be water in the pneumatic parts and the friction resistance of the piston will change If the sealing ring is worn out, it will cause problems such as air leakage. Especially in winter, it is easy to freeze, which will cause aggravated damage to the pneumatic components.

3. Ambient temperature: 0°C ～ +40°C; lower than 0°C will cause the oil-water separator, gas tank and other parts that may contain water to freeze. The lubricating oil will be too viscous due to low temperature, which will affect the lubricating, Resulting in damage or failure of components.

4. Environmental humidity: relative humidity 20～80%RH (non-condensing).

5. Keep away from strong vibration sources and electromagnetic interference; if the distance is too close, the user must be equipped with a filter, otherwise it will cause computer screen flickering, LED light flickering, driver alarm, encoder abnormality, or interference with other nearby equipment.

6. An environment with little dust, no harmful and corrosive gases.

7. The foundation is prepared according to the supplier's foundation plan.

8. The user should select personnel who have a high school level or above, understand basic computer operations, and can work in this position for a long time for training.

Qingdao Aiotek Intelligent Equipment Co., Ltd.